Grundorf T2-MYAMPM5DRH-DHB Tour 2 Series Hard Case for Yamaha PM5DRH with Doghouse

OUR PART #: T2-MYAMPM5DRH-DHB

Copied to clipboard

This Tour 2 Mixer Case from Grundorf is custom built to fit the Yamaha PM5D digital mixing console. ...Read more

Grundorf T2-MYAMPM5DRH-DHB Tour 2 Series Hard Case For Yamaha PM5DRH With Doghouse Image 1
Grundorf T2-MYAMPM5DRH-DHB Tour 2 Series Hard Case For Yamaha PM5DRH With Doghouse
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

This Tour 2 Mixer Case from Grundorf is custom built to fit the Yamaha PM5D digital mixing console. The case comes in a black finish with a ventilation panel on the case bottom and doghouse feature that allows connectors and snake cables to be covered while the mixer is in use.

Grundorf Tour 2™ Series Mixer style cases are built tough! Each case is constructed with 1/2" multi layer plywood with a durable ABS laminate finish. The edges are finished with double edged aluminum extrusion. The lid-to-body seal is made with an interlocking aluminum tongue and groove valance system to provide a tight seal. We use 12 rivet point recessed handles and 10 rivet point recessed catches to provide the strength needed for years of wear-and-tear. The handles and catches all use a steel washer backed rivet system for greater durability.

Grundorf Tour 2™ Series Mixer Style Cases feature a lift-off lid design. Each case comes standard with 1" high-density foam interior, heavy-duty ball corners and stacking ball corners, four recessed catches (two front and two back). Cases through 18" inside depth include 3 recessed handles (one front and one each on left and right sides). Cases 19" inside depth or greater include 5 recessed handles (one front and two each on left and right sides).

Additional options on Grundorf Mixer style cases include:

MIXER TABLE - The Mixer Table option adds a "lip" under the bottom tray of the mixer case which stores a pair of wishbone table legs. This option requires minimum inside case dimensions of: W - 40" and D - 22".

COMPARTMENT - Add an additional storage compartment to the side or rear of any mixer case to store power supplies, cords, and other accessories. The compartments may have painted, carpeted or foam lined interior finishes.

KEY LOCKS - Add optional recessed key-locking catches to your case to secure your valuable gear!

DOGHOUSE - STANDARD - The Grundorf Standard Doghouse allows connectors and snake cables to be covered while the mixer is in use. The Standard Doghouse is constructed of birch plywood and has a black spatter paint finish. This doghouse adds 8" cable clearance and 9" to the overall depth of the case. The height of the doghouse is the same as the mixer.

DOGHOUSE - TOUR - The Grundorf Tour Doghouse is a "boned-up" version of our standard mixer doghouse. This doghouse is constructed of 13-ply Baltic birch and has an aluminum reinforcement top bar, giving this doghouse maximum strength and added protection for your mixer. The end braces of the doghouse are 1.5" thick Baltic birch for extra support.

CASTERS - Add a 3" or 4" caster dolly plate to your mixer case. The casters are mounted to a plywood dolly plate which is then mounted to the top lid of the case. There is a minimum width required for dolly plates to prevent the wheels from "knocking". This minimum may require the caster dolly plate to be wider than the actual case.

Specifications:

  • INSIDE DIMENSIONS:
  • H – 8.7" W – 35.4" D – 20.8"

Note:

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.