ETC Desire D40 Vivid 40x x7-Color LED Par with Twistlock Cable

OUR PART #: SELD40VI-0A-C MFR #: 7410A1401-0C

Copied to clipboard

This is from ETC's Desire Series of lighting and is a D40 Vivid wash fixture – for high-intensity color mixing across the spectrum for widest color wash use. ...Read more

ETC Desire D40 Vivid 40x X7-Color LED Par With Twistlock Cable Image 1
ETC Desire D40 Vivid 40x X7-Color LED Par With Twistlock Cable Image 2
ETC Desire D40 Vivid 40x X7-Color LED Par With Twistlock Cable
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

This is from ETC's Desire Series of lighting and is a D40 Vivid wash fixture – for high-intensity color mixing across the spectrum for widest color wash use. This model has a usage rating of IP20 (interior) and comes in a black finish with a grounded 20A twist-lock connector.

The Desire D40 luminaire combines 40 Luxeon® Rebel emitters onto one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. The user-interface on the rear of the unit puts the control in your hands – Desire luminaires can be managed by any RDM-enabled controller or on their own.

Each fixture offers Quick Setup options, so you can quickly and easily adjust the luminaire’s performance. Stage, XT (Exterior)/Architectural, High-Impact, Studio and General settings further customize the light output for specific uses.

‘LED lighting doesn’t have to be ugly.’ That’s the philosophy behind the x7 Color System™ technology built into every Desire luminaire. While other LED fixtures on the market produce muted colors with a small range of hues and unnatural white light that makes everything look gray and washed out, Desire luminaires offer unprecedented color capabilities for beautiful, pure light. By combining up to seven LED colors per fixture, the x7 Color System creates a balanced blend of deep, saturated colored or natural white light. And with the Desire luminaires, you get even more color flexibility through the Adaptive Color Control system.

There are five DMX profiles to choose from – Calibrated RGB, Calibrated HSI, Calibrated HSIC, Direct, and Studio – so you can decide how the luminaires will perform. The additional Red Shift option allows the Desire fixtures to mimic a tungsten fade, and the Plus 7 Mode gives you control over each LED color to increase or decrease individual colors. Using the built-in color-pickers on ETC lighting control consoles, you can pick a gel match for the Desire fixtures to produce, or you can modify the color to get the exact shade you want. D40’s rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface make it ideal for multiple applications.

ETC SELD40VI-0A-C Features:

  • UL 1573-rated for indoor use
  • 50,000-hour LED life
  • Power pass through and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings
  • Easy-access slots for secondary lenses and standard 7.5-inch PAR accessories
  • Primary field angle of 17°
  • Round and oblong beam-diffusers available
  • DMX512 in and thru via 5-pin XLR connectors
  • No-noise, fan-free convection-cooling for acoustically sensitive installations

ETC SELD40VI-0A-C Specifications:

  • GENERAL
    • 40 LED color mixing wash fixture
    • ETL listed to UL1573 – the standard for stage and studio lighting units
    • IP20-rated for indoor use
    • Power and DMX in/thru connections for easy setup
    • User-friendly control interface with multiple modes and fixture settings
  • PHYSICAL
    • Rugged die-cast all-metal housing
    • Easy access slots for secondary lenses and standard 7.5”
  • PAR accessories
    • Available in black (standard), white or silver (optional) or custom colors (contact factory)
    • Hanging yoke standard. Optional yoke/floor stand available
  • ELECTRICAL
    • 100VAC to 240VAC 50/60 Hz universal power input
    • Neutrik power in and thru connections
    • Up to 10 fixtures may be linked via power in/thru connector per 15A circuit
    • Requires power from a non-dim source
  • LED*
    • 50,000 hour LED life (50,000 hours to 70% intensity)
    • 40 Luxeon® Rebel LED emitters
  • *All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.
  • COLOR
    • Exclusive x7 Color System™ seven-color LED array
    • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
    • Broad-spectrum color interacts seamlessly with conventional sources
    • Exclusive optional red-shift option emulates tungsten dimming performance
  • OPTICAL
    • Primary field angle of 17° and beam angle of 8°
    • Secondary lenses available for multiple beam spread options
    • Each fixture ships with a 25° lens; additional lenses must be ordered separately
  • CONTROL
    • DMX512 in and thru via five-pin XLR connectors
    • Multiple control options including RGB, strobe, and console-free Master/Slave mode
    • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
    • RDM functionality for address and setting changes
  • THERMAL
    • Ambient operating temperature of -4° to 104°F (-20° to 40°C)
    • Active electronic thermal management for droop-free operation
    • Noiseless, fan-free convection cooling for acoustically sensitive installations
    • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
  • PHYSICAL
    • Weight* 14 lbs (6.4 kgs)
    • Shipping Weight 17 lbs (7.8 kgs)
  • *Does not include mounting hardware.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.