Product Overview
This is from ETC's Desire Series of lighting and is a Selador D40 Studio HD wash fixture for high-intensity variable white-light output. This light combines warm white and cool white LEDs for variable color temperature mixing resulting in richness and excellent color rendering. This model is rated IP20 (interior) that comes in a black finish with a two pin and ground (Stage Pin) connector.
Designers no longer have to compromise when it comes to white LED lighting! Installations from television and film to architecture and houses of worship – where color temperature and skin-tone rendering are critical – now have an easier, more precise way to light: the Selador® Desire Studio™ range of LED luminaires.
The Studio HD array blends warm-white and cool-white LEDs with a touch of x7 Color to give you variable color-temperature mixing with refined white-point control and precise color rendering. The five colored emitters fill in the white LED spectral gaps to give you the richest white light to beautifully illuminate skin tones, sets and clothing – in person or on camera. Studio HD luminaires offer a range of color temperatures from 800 to 20,000K and allow you to vary lighting tint with easy green and magenta tint-control.
ETC SELD40HI-0A-B Features:
- Studio HD white-light configurations
- Three chassis: IP20-rated D40 and D60 for indoor use; IP66-rated D40XT for exterior use
- Native field angle of 18°
- 25°, 35°, 45°, and 75° round field diffuser lenses and 20°x40°, 30°x70° and 35°x80° oblong diffuser lenses available
- User-friendly control-interface with multiple modes and fixture settings for console-free operation
- DMX-In, -Out and -Thru
- Full RDM capability
- Up to 10 fixtures may be linked via power in/thru connectors per 15A circuit
- ‘Studio’ control mode allows fixtures to be operated with no DMX console required
ETC SELD40HI-0A-B Specifications:
- GENERAL
- 40 LED variable white-light wash fixture
- ETL listed to UL1573 – the standard for stage and studio lighting units
- IP20-rated for indoor use
- Power and DMX in/thru connections for easy setup
- User-friendly control interface with multiple modes and fixture settings
- PHYSICAL
- Rugged die-cast all-metal housing
- Easy access slots for secondary lenses and standard 7.5”
- PAR accessories
- Available in black (standard), white or silver (optional) or custom colors (contact factory)
- Hanging yoke standard. Optional yoke/floor stand available
- ELECTRICAL
- 100VAC to 240VAC 50/60 Hz universal power input
- Neutrik power in and thru connections
- Up to 10 fixtures may be linked via power in/thru connectors per 15A circuit
- Requires power from a non-dim source
- LED*
- 50,000 hour LED life (50,000 hours to 70% intensity)
- 40 Luxeon® Rebel LED emitters
- Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
- *All LED sources experience some lessening of light output and some colorshift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels.This can eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.
- COLOR
- Studio HD™ array uses warm and cool white-light emitters with additional deep-color emitters
- Studio HD produces variable white light with broad spectrum richness
- Studio HD beautifully illuminates skin tones and other objects for natural appearance and high color rendering
- OPTICAL
- Primary field angle of 17°
- Secondary lenses available for multiple beam spread options
- Fixtures ship with a 25° lens; additional lenses must be ordered separately
- Refer to accessories chart for lenses available
- CONTROL
- DMX512 in and thru via five-pin XLR connectors
- Multiple control options including strobe and console free Master/Slave mode
- See DMX Control Table for additional information
- 15-bit virtual dimming engine provides smooth, high quality theatrical fades
- RDM functionality for address and setting changes
- THERMAL
- Ambient operating temperature of -4° to 104°F (-20° to 40°C)
- Active electronic thermal management for droop-free operation
- Noiseless, fan-free convection cooling for acoustically sensitive installations
- Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
- PHYSICAL
- Weight* 14 lbs (6.4 kgs)
- Shipping Weight 17 lbs (7.8 kg)
- *Does not include mounting hardware.
