Product Overview
Composite video distribution amplifier with Unity gain, BNC connectors, 12V AC with P5 power connector.
Specifications:
- Configuration: Four 1X2 Composite Video Distribution Amplifiers; each Channel Has:
- Bandwidth: DC - 200 MHz @ -3dB, fully loaded over full voltage range
- (1Vpp input signal, 0V DC offset)
- Input Coupling: DC
- Input Signal Level: 0.5 - 2Vpp (within -1V to +1V range from ground)
- Impedance: 75 Ohm (Input and Output)
- Input Connector(s): 75 Ohm BNC (total of 4)
- Output Connectors: 75 Ohm BNC (total of 8)
- Gain: Unity - Unity
- Global Variable - 0.75X - 1.75X
- Individual - 0.75X - 1.75X
- Output Series Impedance: 75 Ohms
- Package: Solid epoxy block 2.2” x 4.4” x 1.4”
- (not including connectors)
- Mounting: Two threaded 6-32 inserts
- Power: 12V AC - 11-13V AC (grounded or ungrounded)
- (2.1mm P5 connector)
- < 350mA input current
- FlexPwr - 10-28V AC (ungrounded) or
- 12-32V DC (grounded or ungrounded)
- 2-pin header (Mating connector Phoenix Contact #1881325)
- < 230mA input current @ 12V DC
- < 270mA input current @ 10V AC
- (All currents measured with 2Vpp 1kHz sine wave fully loaded)
- Operating Temperature: 12V AC -40C to + 50C
- Operating Humidity: 0% - 95%
- Shipping Weight: 3 lb