RDL D-ECR1L

Power On/Off & Level Remote Control in White

OUR PART #:  D-ECR1L Write the First Review.

Our Price: $106.23
List Price: $142.09
You save 25%!
  • Remote System Power On/Off Control Panel
  • Level Control Provides 0 to 10 Vdc at Controller
  • Pushbutton Toggles Power On and Off/Standby
  • LED Power Indicator Color Indicates Mode
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' D-ECR1L is a wall-mounted remote control that provides A/V system power-up and power-down. This control directly interfaces with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller. The D-ECR1L provides a momentary push-button for power control and an LED power status indicator. The indicator glows yellow when the associated system power is in the standby mode. Pressing the soft power button toggles the system power on. The indicator glows blue when system power is on. Pressing the button when the power is on returns the system power to standby. If the host controller is set to allow full power-down, holding the button for 3 seconds takes the system out of standby and turns it off. The system remains off until the button is again pushed, placing the system in standby.

The D-ECR1L includes a single-turn level control providing 0 to 10 V VCA linear control voltage through the host controller. This control is normally used to adjust the master audio volume of an A/V system. Both remote controls connect with their host controllers through twisted-pair cable terminated in RJ45 connectors.

The D-ECR1L features a standard RDL white front panel. This finish matches other RDL remote selectors and jack plates for a visually appealing installation of multiple controls.

Features:

  • Remote System Power On/Off Control Panel
  • Level Control Provides 0 to 10 Vdc at Controller
  • Pushbutton Toggles Power On and Off/Standby
  • LED Power Indicator Color Indicates Mode
  • Blue LED: Active System Power
  • Yellow LED: Standby (System Power Off)
  • Red LED: Power Off and Auto Power-Up Disabled
  • Flashing Red LED: Emergency Override
  • Direct Control of Modules with RJ45 Power Control
  • Connection to Controller Using Twisted-Pair Wiring

Specifications:

  • Level Control: 0 to 10 Vdc at controller, linear, single-turn
  • Power button: Momentary
  • Indicator:
    • Red = Power Off
    • Yellow = Power Standby
    • Blue = Power On
  • Mounting: Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately
  • Dimensions: 4.1" H x 1.44" D (without knob), 2" D (with knob), 1.7" W (10.4 x 3.7-5 x 4.33 cm)
RDL DC-4G  Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

RDL DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
$96.22 List Price: $128.71You Save 25%
In Stock
Free Shipping AvailableFree Shipping
RDL WB-1U Single-Gang Universal Wall Box

RDL WB-1U Single-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
$14.68 List Price: $17.32You Save 15%
In Stock
RDL CP2-S CP-2S

RDL CP2-S CP-2S

Dimensions: 4.55" x 4.55" (11.6 x 11.6 cm)
$12.44 List Price: $14.67You Save 15%
In Stock
RDL DC-4W  Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, White

RDL DC-4W Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, White

The Radio Design Labs DC-4W desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis ...
$96.22 List Price: $128.71You Save 25%
Usually ships in 6-10 business days.
RDL DC-3W White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels

RDL DC-3W White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels

Radio Design Labs' DC-3W desktop chassis hold three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
$82.30 List Price: $110.08You Save 25%
Usually ships in 6-10 business days.
RDL DC-3G  Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels

RDL DC-3G Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels

Radio Design Labs' DC-3G desktop chassis holds three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount ...
$82.30 List Price: $110.08You Save 25%
Usually ships in 6-10 business days.
RDL RM-D9 3RU Rack Panel Mount for 9 Decora Models

RDL RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
$70.06 List Price: $93.71You Save 25%
Usually ships in 3 business days.
RDL DC-2G  Wall Mount Chasis for Decora

RDL DC-2G Wall Mount Chasis for Decora

The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
$68.58 List Price: $91.74You Save 25%
Usually ships in 6-10 business days.
RDL DC-2W Desk Top Chassis for Decora, White

RDL DC-2W Desk Top Chassis for Decora, White

The DC-2W white desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
$68.58 List Price: $91.74You Save 25%
Usually ships in 6-10 business days.
RDL RM-D3 1RU Rack Panel Mount for 3 Decora Models

RDL RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
$60.26 List Price: $80.60You Save 25%
Usually ships in 4 business days.
RDL DC-1W  Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels

RDL DC-1W Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels

The Radio Design Labs DC-1W desktop chassis holds one Decora-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
$54.58 List Price: $72.98You Save 25%
Usually ships in 4 business days.
RDL DC-1G  Wall Mount Chasis for Decora

RDL DC-1G Wall Mount Chasis for Decora

The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
$54.58 List Price: $72.98You Save 25%
Usually ships in 3 business days.
RDL SMB-2G Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates

RDL SMB-2G Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates

Radio Design Labs' SMB-2G dual-gang surface mount boxes holds two Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the ...
$44.46 List Price: $59.46You Save 25%
Usually ships in 3 business days.
RDL SMB-1G  Single-Gang Gray Surface Mount Boxes for Decora-Style Devices

RDL SMB-1G Single-Gang Gray Surface Mount Boxes for Decora-Style Devices

Radio Design Labs' SMB-1G surface mount boxes holds one Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the rear of the ...
$40.89 List Price: $54.69You Save 25%
Usually ships in 6-10 business days.
RDL WB-2U Dual-Gang Universal Wall Box

RDL WB-2U Dual-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
$15.84 List Price: $18.68You Save 15%
Usually ships in 4 business days.
RDL CP4-S CP-4S

RDL CP4-S CP-4S

For use with RDL SMB-4 and DC-4 for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Shipping Weight: 0.16 lbsPackage Dimensions: 7" x 9"
$14.39 List Price: $16.98You Save 15%
Usually ships in 6-10 business days.
RDL CP2-G CP-2/G

RDL CP2-G CP-2/G

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
$12.44 List Price: $14.67You Save 15%
Usually ships in 3 business days.
RDL CP1-W Wall Plate, Single Cover Plate, White

RDL CP1-W Wall Plate, Single Cover Plate, White

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
$11.43 List Price: $13.49You Save 15%
Usually ships in 4 business days.
RDL CP1-G CP-1/G

RDL CP1-G CP-1/G

Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
$11.44 List Price: $13.49You Save 15%
Usually ships in 4 business days.
RDL CP1-S CP-1S

RDL CP1-S CP-1S

The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
$11.45 List Price: $13.49You Save 15%
Usually ships in 6-10 business days.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information