Electro-Voice EVU-2062/95 Dual 6.5" 2-Way Loudspeaker, Black

The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage patterns making it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applications.

The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” diaphragm titanium compression driver coupled to a Constant Directivity™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was developed using FEA optimization to provide the highest sensitivity while achieving the highest level of speech intelligibility. The crossover design uses 18-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response and a protection circuit for long term reliability.

The EVU series is constructed of 9-ply hardwood plywood enclosures with six integral M8 suspension points to support a wide variety of mounting positions. The EVU system is finished in textured paint, available in either white or black. Each EVU system includes a universal U-bracket to facilitate mounting. The U-bracket provides full unobstructed rotation of the loudspeaker (330° unobstructed rotation if the transformer kit is installed). Additional mounting points are located on the rear of the enclosure for use with an Omnimount™ type bracket. An available 70.7/100-V transformer kit may be easily mounted over the input panel for use in distributed systems. All of these features give you the flexibility to address a large range of venues, while quickly and precisely supporting customer requirements.

Electro-Voice EVU-2062/95-BLK Features:

• Sonically matched to all EV-Innovation lines
• Sophisticated 18-dB-octave passive crossover/EQ networks
• Asymmetrical enclosure for ideal under-balcony and stage-lip aiming
• 1.3” (33 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driver
• Dual 6.5” (165 mm) LF transducers
• Advanced third-order crossover network with HF protection
• Coverage pattern: 90° x 50° Constant DirectivityTM rotatable waveguide
• 94 dB sensitivity, 125 dB maximum SPL
• System rating: 300 W continuous, 1200 W peak
• (6) M8 threaded suspension points
• Universal U-bracket included
• 70.7/100-V transformer accessory optional
• NL4 cover plate accessory optional
• Optional Neutrik Speakon(R) connector panel

Electro-Voice EVU-2062/95-BLK Specifications:

• Axial Sensitivity (SPL, 1 W @ 1 m): 94 dB (1W/1M)
• Color: Black
• Finish: Textured paint
• Nominal Impedance: 8 ohm
• Waveguide: 6 in. x 6 in., rotatable
• Frequency Response (-3 dB): 100 Hz - 16 kHz Half Space
• Frequency Response (-10 dB): 70 Hz - 20 kHz Half Space Recommended High-Pass Frequency: 90 Hz
• Max. SPL/1m (calc) Continuous: 119, Peak: 125 dB
• Coverage (Nominal -6 dB) H: 90 °
• Coverage (Nominal -6 dB) V: 50 °
• System Power Handling (Continuous/Program/Peak): 300//1200 Watts EIARS-426A (eight hours)
• LF Transducer: Two 6.5-inch (165 mm) ICT-6.5-8 woofers
• HF Transducer: One 1.3-inch (33 mm) diaphragm ICT-1-8 compression driver
• Minimum Impedance: 6 ohm
• Connector Type: 4-pin Phoenix/Euroblock screw terminals (up to 10 AWG wire)
• Enclosure Material: 9-ply hardwood plywood
• Grill: 18-gauge steel with cloth behind
• Suspension: Six M8 threaded points
• Height: 8.23" (209 mm)
• Width: 20.98" (533 mm)
• Depth: 8.15" (207 mm)
• Weight Net: 24.91 lbs (11.3 kg)
• Shipping Weight: 31.31 lbs (14.2 kg)