Vaddio 999-8565-000 EasyTalk Sound Bar

When added to the EasyUSB Mixer/Amp, the EasyTALK Sound Bar offers high-fidelity voice support of far-end audio for any conference application. It can be positioned above or below a flat screen TV or sit freestanding on a desk or credenza. A pair of rubber speaker feet are supplied for tabletop mounting.

Features:

• One (1) EasyTalk Sound Bar (non-powered) for use with EasyUSB Mixer/Amp
• 3.75-inch paper cone woofers for superior dynamic impact
• 0.625-inch aluminum tweeters for superb clarity

Specifications:

• Audio Specifications Frequency Response:
  • 20 HZ to 20 kHz
  • Dynamic Range: > 90dB
  • THD + Noise: < .02%
• Analog Line Input Connector:
  • RCA (Unbalanced)
  • Impedance: 10Kohm (Unbalanced)
  • Nominal Level: -10dBu (Unbalanced)
• Analog Line Output Connector:
  • RCA (Unbalanced)
  • Impedance: 10Kohm (Unbalanced)
  • Nominal Level: -10dBu (Unbalanced)
• Amplifier Connector:
  • Two 2-Pin Molex Eurostyle 5.0mm Terminal connectors
  • Impendence: 8 ohm
  • Amplifier Output: 2X20 Watts
  • THD + Noise: < .2% at 1/3 power
• USB Audio Interface Connector: Type-B Female
  • Type: USB 2.0 Compliant
  • PC Audio Controls: Mute & Volume
  • PC HID Controls: On/Off Hook (application dependent)
• EasyMic Ports Connector: Two (2) RJ-45
  • Interface: Proprietary
  • Max Distance: 100 feet to MicPOD
• Dip Switch Settings 8-Position Dip Switch, Audio Processing - Mixing Modes, Compressor, Filter, Delay, and Updates
• User Indicators Communications Status, Mute, Power
• Power Supply 5.5mm OD x 2.5mm ID Coax Connector
• Supply: 18 VDC, 2.75 Amp, Auto-switching
• Serial Control Protocol:
  • RS-232 (external control), 38.4K baud