John Hardy 990-1CH

rvo 1-Channel Microphone Preamplifier

OUR PART #:  990-1CH Write the First Review.

Our Price: $1,537.60
List Price: $1,550.00
  • JT-16-B Input Transformer. Jensen's best mic input model.
  • Two 990 Discrete Op-Amps Per Channel. Faster, quieter, more powerful and better sounding than typical monolithic op-amps.
  • Elimination Of All Coupling Capacitors From The Signal Path. Results in less degradation of the audio signal.
  • JT-11-BMQ Output Transformer. Jensen's best line output transformer.
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

The Jensen Twin Servo 990 Mic Preamp is considered the world's finest mic preamp by audio experts. It's the ideal integration of advanced design software, hardware, engineering know-how, and carefully controlled 'golden ears' tests. It has earned high marks for sonic performance since its introduction in 1988.

The basic circuit was originally published as an application note by Jensen Transformers for their finest microphone input transformer, the JT-16-B. Each channel uses two precision 990C operational amplifier modules, developed and patented by Deane Jensen, to achieve one tenth the distortion and twice the bandwidth of a single stage design.

The Jensen Twin Servo 990 mic preamp has a 19" wide mainframe rack-mount chassis (1.75"H x 19"W x 8"D) and this model offers 1-channel. Additional channels can be easily added later up to the total capacity of the mainframe.

Features:

  • JT-16-B Input Transformer. Jensen's best mic input model.
  • Two 990 Discrete Op-Amps Per Channel. Faster, quieter, more powerful and better sounding than typical monolithic op-amps.
  • Elimination Of All Coupling Capacitors From The Signal Path. Results in less degradation of the audio signal.
  • JT-11-BMQ Output Transformer. Jensen's best line output transformer.
  • Input Bias Current Compensation Circuitry And DC Servo Circuitry. Eliminates signal degrading coupling capacitors.
  • Fully Sealed Conductive Plastic Gain Control. Provides smooth continuous gain adjustments from 16dB to 60dB.
  • 20 OHM MIC switch or 20dB PAD switch.
  • POLARITY REVERSE switch.
  • PHANTOM POWER switch.
  • All Front Panel Switches Are LED Illuminated.
  • Gold Plated XLR Connectors for maximum reliability.
  • Ground Lift Switch On Each Channel. Helpful for eliminating ground loops.
  • VU-1 meter. Very accurate and informative 20 segment LED meter, with separate Peak LED, for monitoring preamp output.
  • Toroidal Power Transformer With Additional Shielding. Eliminates hum problems so no external power supply is needed.
  • Universal Power Supply. Internal switch provides six primary voltage choices to accommodate use anywhere in the world.
  • Chassis Ground Isolation Switch. Helpful for eliminating ground loops.
  • Pin 2 Or Pin 3 High. Internal jumpers make changes in the field easy.

Specifications, typical (0dBu = 0.775V):

  • Voltage Gain Range: ±1 dB, 16 to 60dB
  • E.I.N., 20-20kHz bandwidth, unweighted, 60dB gain, 0dBu = 0.775V: 150 Ohm source, -128.7dBu
  • Frequency Response, ref: 1kHz
    • 20Hz: -0.05 typ, -0.1 max dB
    • 20kHz: -0.05 typ, -0.1 max dB
    • 0.4Hz and 140kHz: -3 dB
  • Time Domain Response
    • Deviation From Linear Phase (maximum): 20Hz to 20kHz, ± 2 deg
    • Group Delay: 20Hz to 120kHz, 2.16 ±0.05 µs
    • Squarewave Risetime: 2.2µs
    • Squarewave Tilt: 20 Hz, 5.8%
  • Total Harmonic Distortion (note 1)
    • Output Level + 4dBu, any gain setting: 100Hz to 20kHz, 0.001 typ, 0.003 max %
      • 20Hz, 0.036 typ, 0.100 max %
    • Input Level +8dBu (note 2): 100Hz to 20kHz, 0.001 typ, 0.003 max%
    • 20Hz, 0.120 typ, 0.300 max%
  • Common Mode Rejection Ratio
    • 60Hz: 125dB
    • 1kHz: 100dB
    • 10kHz: 80dB
  • Common Mode Input Voltage: ±300 V-pk
  • Optimum microphone Impedance (switch selectable): 150/20 Ohms
  • Input Impedance, ±15% max: 20Hz to 20kHz, 1.27k Ohms
  • Phantom Power:
    • Voltage: +52VDC
    • Current(maximum): 9.5mA
  • Maximum Output Level: 75 Ohm load, +24 dBu
  • Output Load Impedance Range: minimum/nominal 150/600Ohms
  • Output Source Impedance: 20Hz to 20kHz, 70 ±5Ohms
  • Power Requirements, 4 Channels ±15%
    • 100, 120, 140, 200, 220, 240 VAC
    • 48 to 66 Hz
    • 25 Watts
  • Dimensions (not 3): 1.75"H x 19"W x 8"D

Note

Note: Image shown above has been modified to better represent the 1-channel model, actual appearance may vary.

Unless otherwise specified : 25°C ambient, 150 ohm source, 600 ohm load.

(1) Low frequency response distortion is almost entirely 3rd harmonic.

(2) Worst case of maximum possible input at minimum gain with unclipped output.

(3) Handles extend 1" beyond the front panel.

"Twin Servo" and "Comtran" are registered trademarks of Jensen Transformers, Inc.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information