Doug Fleenor Design MARCONI-LV Wireless 5-pin DMX Receiver, Low Voltage, 1-Output

The Marconi "low voltage" (Marconi LV) is identical in performance to the Marconi SP but is powered by low voltage instead of line voltage and has only one DMX512 output. The LV is designed to mount to our LED300 power supply but can be used with any 24V system that provides power on pins 1 and 4 of a four pin XLR (color scroller for example). The LV may also be powered by an optional external supply, model Marconi LV PSU.

Marconi components are 100% compatible with W-DMX products from Wireless Solution as well as from other W-DMX partners.

Doug Fleenor Designs MARCONI-LV Specifications:

• Output circuit: EIA-485 slew rate limited driverprotected by two self resetting fuses and two transient absorbing diodes.
• Connectors:
  • DMX512: Gold plated 5 pin NeutrikPin 1: Common, Pin 2: Data-, Pin 3: Data+, Pins 4&5: n/c
  • Power: Gold plated 4 pin Neutrik Pin 1: Power, Pins 2&3: connected through, Pin 4: Power
  • Antenna: Gold plated Reverse Polarity SMA connector
• Antenna: A 2dB whip antenna is supplied. Gainantennas are available to increase the reception range.
• User controls: Recessed CONFIG button. Activatedusing bent paper clip (not supplied).
• Indicators:
  • Red: POWER
  • Blue: ASSIGNED, illuminates when the unit is assigned to a transmitter
  • Yellow: RF LINK, illuminates when the assigned transmitter is on and within range
  • Green: DMX512, illuminates when DMX512 is available at the output
• Power in: 12 to 24 VDC or 9 to 18 VAC, 100 mA,Polarity independent (internal diode bridge)
• Color: Black with laser engraved nomenclature
• Size & weight (HxDxW): 1.5" x 4.75" x 3.5", 1pound
• Mounting:
  • A screw and fender washer are provided to mount the Marconi LV to the handle of an LED300 power supply
  • A 1/2" hole is provided for C clamp or half coupler mounting
  • Two 3/8" X 3/4" slots are provided for safety cables or other mounting techniques.