RDL D-AVM4 Audio/Video Decora Jack Panel, DB15, RCA, Mini

Radio Design Labs' D-AVM4 is a great choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel.

The front panel features a pass-through video monitor connector. Video connections are made on the front and rear panel using a standard dB15 video connector.

The front panel features 2 gold plated phono jacks and a single stereo mini-jack, intended for stereo consumer line level audio sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.

Features:

• Stereo Audio Inputs to Stereo Audio Output
• Stereo Inputs on RCA Jacks and Stereo Mini-Jack
• Unbalanced Output on Detachable Terminal Block
• Video Monitor Pass-Through Panel Connector

Specifications

• Typical Performance:
  • Audio input connectors (3): RCA jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
  • Video input connector: Female DB15
  • Audio output connector: Detachable terminal block (Left and Right unbalanced audio)
  • Video output connector: Female DB15 (pass-through from front panel)
  • Dimensions:
    • Height: 4.13 in. (10.49 cm)
    • Width: 1.3 in. (3.3 cm)
    • Depth: 1.8 in. (4.57 cm)
  • Mounting Box Minimum Depth: 0.15 in. (0.38 cm) plus the depth of the installer-provided video connector