Panasonic PTEX12KU

13,000 Lumens XGA 2-Lamp LCD Projector

OUR PART #: PTEX12KU Write the First Review.

Panasonic PTEX12KU 1
Panasonic PTEX12KU 2
Panasonic PTEX12KU 3
Panasonic PTEX12KU 4

Call for price! Not available online.

Related Products

Panasonic's PT-EX12K's 2-Lamp Optical System uses high-output, 380 W UHM lamps to produce high brightness of 13,000 lm. Contrast is also high at 4,000:1.

Excellent Colors with Pure Color Control - It is inherently difficult for LCD projectors to attain both high brightness and superb color reproduction. For this reason, in addition to the three conventional LCD panels that control the light intensity for the red, blue and green primary colors, the PT-EX16K/EX12K also features a Pure Color Control function that independently controls the light intensity of yellow coloring. This provides rich overall color expression while maintaining brightness.

The use of a full 10-bit image processing system provides smooth tonal expression. For example, skin tones appear natural and true to life.

The Multi-Lamp Optical System Enables Stable, Extended Operation - Even if one lamp goes out during use, the other lamps continue, so projection is not interrupted. Lamp Relay mode also allows long-time, continuous operation.

Highly Durable Optical Engine Ensures Excellent Long-Time Image Quality - The LCD panels and polarizers inside the LCD projector's optical block tend to degrade over time. Their degradation adversely affects image quality. Inorganic materials are used for the LCD panels, and for the polarizers that are prone to degradation, to resist time-related changes in the optical block, therefore achieving a replacement cycle of up to 10,000 hours.

Long-Lasting Eco Filter with User-Friendly Maintenance - The PT-EX12K features the Eco Filter, which efficiently captures dust and requires no replacement for up to 12,000 hours.* It consists of Micro Cut Filters** that use an ion effect to collect extremely small dust particles. These large-surface, pleated filters have a high dust collecting performance. In addition to its long replacement cycle, the Eco Filter can be washed with water*** for repeated use, further increasing its ecological performance. The Eco Filter can also be removed through the top panel of the projector, enabling filter replacement on ceiling-mounted projectors without having to detach the projector from its mounting bracket.

Horizontal/Vertical Lens Shift Function and a Variety of Lenses - Both zooming and focusing can be done by remote control. The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. You can also choose from a wide variety of lenses, from short or long focus zoom lenses to a fixed focus lens for rear projection. This makes it possible to install the projector in a variety of locations.

A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site.

Corner Keystone Correction Enables Angled Projection - All you need to do is designate four points as the corners of the projected image, and this function automatically carries out horizontal and vertical keystone correction.

Multi-Screen Support System Seamlessly Connects Multiple Screens - The Multi-Screen Support System optimally adjusts multiple screens: Edge Blending: The edges of adjacent screens can beblended and their luminance controlled. Color Matching: This function corrects for slightvariations in the color reproduction range of individual projectors.

Versatile Interfaces and Illuminated Terminals and Control Panel - The wide-ranging terminals include 2 sets of RGB inputs*, an HDMI input, and a DVI-D input. Mounting the optional Interface Board ET-MD16SD1 also accommodates HD/SD-SDI signal input. The terminal connection area is LED illuminated, and a backlight is provided for the control panel buttons, ensuring smooth and easy operation in the dark.

The Mechanical Shutter lets you mechanically block the light to completely blackout the screen, and prevents light leakage from the lens. When closing the shutter, the projection image gradually fades out, then gradually fades in when opening, which brings more attractive stage effects. Easy Remote Control and Observation A web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status. In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC. The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors. The PT-EX12K's lamp can be reached through the top panel for easy replacement. This eliminates the need to detach the projector from its mounting bracket in ceiling-mounted applications and greatly simplifies maintenance. Other Features: Direct Power Off allows the power cord to be unplugged rightafter use. Wireless and wired remote control that allows the allocationof up to 64 IDs. Logo Transfer Software* lets you upload any startup logo youwant.*Still images that can be uploaded are limited to 1,024 x 768 pixelbitmap files. Also, the application reduces the number of colors to191.

The Mechanical Shutter lets you mechanically block the light to completely blackout the screen, and prevents light leakage from the lens. When closing the shutter, the projection image gradually fades out, then gradually fades in when opening, which brings more attractive stage effects.

Easy Remote Control and Observation - A web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status. In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC. The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors. The PT-EX12K's lamp can be reached through the top panel for easy replacement. This eliminates the need to detach the projector from its mounting bracket in ceiling-mounted applications and greatly simplifies maintenance.

Other Features:

  • Direct Power Off allows the power cord to be unplugged right after use.
  • Wireless and wired remote control that allows the allocation of up to 64 IDs.
  • Logo Transfer Software* lets you upload any startup logo you want.

Specifications:

  • Power supply: 200-240 V AC, 50/60 Hz
  • Power consumption: 1,850 W (18 W with standby mode) 940 W (17 W with standby mode)
  • LCD panel:
    • Panel size: 46 mm (1.8 inches) diagonal (4:3 aspect ratio)
    • Display method: Transparent LCD panel (x 3,R/G/B)
    • Pixels: 786,432 (1,024 x 768) x 3, total of 2,359,296pixels
    • Pixel configuration: Stripe
  • Pure color control device: 1
  • Lens: Optional
  • Lamp: 380 W x 2, lamp replacement cycle
  • Screen size (diagonal): 1.02–15.24 m (40"–600") (2.54–15.24 m[100"–600"] with the ET-ELS03), 4:3 aspect ratio
  • Brightness**: 13,000 lm (2-lamps, lamp power: Auto/Normal, Optional lens: ET-ELS03)
  • Center-to-corner uniformity**: 90 %
  • Contrast**: 4,000:1 (full on/full off, 2-lamps, lamp power:Auto)
    • **Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • Resolution: 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
  • Scanning frequency:
    • HDMI/DVI-D: Horizontal: 26–80 kHz, vertical:23–85 Hz, dot clock: 162 MHz or lower
  • Keystone correction range: Vertical: Maximum ±40°, Horizontal:Maximum ±40° (with XGA signal input, for vertical/horizontal correction only,Optional lens: ET-ELS03)
  • Installation: Ceiling/floor, front/rear
  • Cabinet materials: Molded plastic
  • Dimensions with legs at shortest position, optional lens not included:21.2" W x 10.6" H x 29.8" D(538.5 x 268 x 757 mm)
  • Weight: Approximately 28 kg (61.7 lbs) (optional lens not included)
  • Noise level: 42 dB (lamp power: Normal/Eco2), 39 dB (lamp power:Eco1)
  • Operating temperature: 0°C- 40°C [32°F-104°F] (less than 1,400 m [4,593ft] above sea level), 0°C- 30°C [32°F-86°F] (between 1,400 m and 2,700 m[4,593 ft to 8,858 ft] above sea level)
  • Operating humidity: 20–80 % (no condensation)
  • Supplied accessories: Power cord x1, power cord holder/power cord cover x1 set, wireless/wired remote control unit, batteries (AAA/R03/LR03 typex2), VGA cable x1, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software, Real Color Manager Pro.), lens attachmentx1 set, lens lock lever fixing bracket x1 set, light shielding plate x3 set,spacer x1 set, cable tie x3
  • Caution: Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.

NOTES:

  • 1: This product must not be used in residential areas.
  • 2: This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
  • 3: The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail toilluminate, due to impact or extended use.
  • 4: The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
  • 5: The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
  • 6: Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
  • *With the lamp power set to Normal. The usage environment affects the duration of the filter.
    • *With the lamp power set to Normal. The usage environment affects the duration of the filter.
    • **Electrostatic filters.
    • ****When washing with water, please follow the procedures listed in the operating instructions. Also, Panasonic recommends replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
Panasonic ETMD16SD1 ET-MD16SD1

Panasonic ETMD16SD1 ET-MD16SD1

Panasonic's ET-MD16SD1 is an HD/SD-SDI input signal board for their PT-EX16KU projector.
Call for price! Not available online.
Panasonic ETELT03 ET-ELT03

Panasonic ETELT03 ET-ELT03

Panasonic's ET-ELT03 zoom lens (6.3-9.0:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELW06 1.2-1.5:1 Zoom Lens for PT-EX16KU Projector

Panasonic ETELW06 1.2-1.5:1 Zoom Lens for PT-EX16KU Projector

Panasonic's ET-ELW06 is a zoom lens (1.2-1.5:1) for use with their PT-EX16KU projector.
Call for price! Not available online.
Panasonic ETELW03 ET-ELW03

Panasonic ETELW03 ET-ELW03

Panasonic's ET-ELW03 zoom lens (0.8:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELW02 ET-ELW02

Panasonic ETELW02 ET-ELW02

Panasonic's ET-ELW02 zoom lens (1.4-1.8:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELT02 ET-ELT02

Panasonic ETELT02 ET-ELT02

Panasonic's ET-ELT02 zoom lens (4.4-6.2:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELW04 ET-ELW04

Panasonic ETELW04 ET-ELW04

Panasonic's ET-ELW04 zoom lens (1.5-2.0:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETPKE16H Ceiling Mounting Bracket for the PTEX16KU Projector

Panasonic ETPKE16H Ceiling Mounting Bracket for the PTEX16KU Projector

The Panasonic ETPKE16H is the ceiling mount bracket for the Panasonic EX16KU Projector and high ceilings (use with optional bracket assembly, sold separately-contact your sales representative for more information).
Call for price! Not available online.
Panasonic ETELS03 ET-ELS03

Panasonic ETELS03 ET-ELS03

Panasonic's ET-ELS03 zoom lens (2.6-3.5:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELM01 ET-ELM01

Panasonic ETELM01 ET-ELM01

Panasonic's ET-ELM01 zoom lens (3.5-4.5:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETELS02  Zoom Lens (2.0-2.6:1) for PT-EX16K Series Projectors

Panasonic ETELS02 Zoom Lens (2.0-2.6:1) for PT-EX16K Series Projectors

Panasonic's ET-ELS02 zoom lens (2.0-2.6:1) is for use with their PT-EX16K series of projectors.
Call for price! Not available online.
Panasonic ETLAE12  Replacement Lamp for Sanyo PLC-HF10000, PT-EX12KU Projectors

Panasonic ETLAE12 Replacement Lamp for Sanyo PLC-HF10000, PT-EX12KU Projectors

Panasonic's ETLAE12 is a replacement lamp for use in Sanyo's PLC-HF10000 and PT-EX12KU projectors.
$599.00 List Price: $629.00You Save 5%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information