RDL HD-PA35A

35 Watt, 4/8 Ohm Power Amplifier

OUR PART #:  HD-PA35A Write the First Review.

Our Price: $243.29
List Price: $325.44
You save 25%!
  • One input with front-panel volume control
  • Bass and Treble tone controls
  • Designed as a single-zone amplifier
  • Master volume VCA controlled with remote adjustment capability
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' HD-PA35A is a single-input audio amplifier for systems demanding high energy efficiency. It may be used as a single-zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another RDL HD series mixer amplifier. The 35 W power amplifier output is driven from a high-efficiency Class D amplifier stage. The amplifier output level may be VCA controlled using various optional RDL remote controls, or by industry standard 0 to 10 Vdc or 0 to 10 kOhm controls. The output provides a constant voltage (25 V, 70 V or 100 V). The HD-PA35A is engineered and manufactured in the U.S.A.

The HD-PA35A provides a front-panel control to set the input gain. An optional remote control connected to the rear-panel detachable terminal block provides for remote adjustment of the output level. The tone controls adjust the equalization at the amplifier output.

The amplifier includes an analog compressor/limiter for audio fidelity noticeably superior to conventional class D amplifiers with digital limiting. Increasing the input gain can substantially increase the average output power beyond that of a standard 35 W amplifier. A red front-panel LED flashes when the compressor is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The HD-PA35A, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating.

A blue POWER LED illuminates when the HD-PA35A is powered from its external 24 Vdc power supply (included). The power LED is dim when the mixer amplifier is in the standby mode, and is bright when the amplifiers are fully active. A front-panel push button is provided to manually switch between standby and active modes. The power amplifiers are equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation.

Radio Design Labs HD-PA35A Features:

  • One input with front-panel volume control
  • Bass and Treble tone controls
  • Designed as a single-zone amplifier
  • Master volume VCA controlled with remote adjustment capability
  • Amplifier output on detachable terminal block
  • Unbalanced summing inputs on RCA jacks
  • Includes power supply
  • High-efficiency Class D operation

Radio Design Labs HD-PA35A Specifications:

  • Rated Power: 35 W RMS
  • Audio Input: Unbalanced stereo summing input on RCAjacks
  • Maximum Input Level: + 9 dBV (+15.5 dBV, one input);(for 1% THD+N at output)
  • Input level: -15 dBV (180 mV, to cross compressorthreshold equaling 23 W amplified output, both input jacks driven)
  • Noise: < -75 dB (max gain)
  • THD+N: < 0.5% (1 kHz at compressor threshold)
  • Compressor: Threshold 2 dB below rated output,automatically adjusting attack and release times
  • Frequency Response: Constant voltage: +/- 3 dB (50 Hzto 18 kHz)
  • Tone Controls: ±10 dB @ 10 kHz, ±9 dB @ 100 Hz(front-panel) with center detent
  • Power Amplifier Output: 35 W RMS (25, 70 or 100 V);
  • Indicators (3): Front-panel: Signal present (green),Compressor activity (red), Power (bright=on, dim=standby, blue)
  • VCA: Output level, 0 to 10 Vdc control, detachableterminal block (compatible with RDL VCA wall controls)
  • Front-panel controls (4): Input, EQ (2, bass andtreble), Power (latching pushbutton, on/standby)
  • Ambient Operating Environment: 0° C to 50° C Maximum;20° C Recommended
  • Power Supply (included): 100 to 240 Vac, 50-60 Hz, 50W; 24 Vdc output to amplifier chassis
  • Dimensions: 3.5" H x 8.5" W x 6.75" D (8.89 x 21.6 x17.1 cm)
  • Weight: 6 lb.(2.7 kg)
RDL PS24V2A 24VDC, 2A Universal Power Supply with North American Plug-End Cord

RDL PS24V2A 24VDC, 2A Universal Power Supply with North American Plug-End Cord

Radio Design Labs' PS24V2A is a 24 volt DC Switching Power Supply, with North American cord, 2 Amp output and DC Plug.Radio Design Labs PS24V2A Specifications: Input: 100 to 240 VACOutput: 24 Vdc, 2 A (UL, ...
$74.68 List Price: $99.89You Save 25%
Usually ships in 6-10 business days.
RDL HD-RA2  Rack Adapter for 2x HD Series Products

RDL HD-RA2 Rack Adapter for 2x HD Series Products

Radio Design Labs' HD-RA2 allows you to rack mount 2 HD series products.  Mixer amplifiers may be mounted forward for use control, or may be recessed securely behind a filler panel.Shipping Weight: 4.4 lbsPackage Dimensions: 20" x ...
$58.92 List Price: $78.81You Save 25%
Usually ships in 6-10 business days.
RDL HD-WM2  HD Series Wall Mount Bracket

RDL HD-WM2 HD Series Wall Mount Bracket

RDL's HD-WM2 mounts a compatible RDL HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation. ...
$52.51 List Price: $70.24You Save 25%
Usually ships in 6-10 business days.
RDL HD-FP2L  HD Series Filler Panel with Lens

RDL HD-FP2L HD Series Filler Panel with Lens

RDL's HD-FP2L mounts in front of an HD series product to allow viewing while preventing user adjustment or tampering. Lens is removable during setup.
$50.08 List Price: $66.97You Save 25%
Usually ships in 6-10 business days.
RDL HD-BP1 BackPack HD Series Amplifier Rear Cover

RDL HD-BP1 BackPack HD Series Amplifier Rear Cover

RDL's HD-BP1 back-pack mounts to an RDL HD series mixer/amplifier to prevent user access to the rear panel. The back-pack holds the power supply and provides a completely closed back for the installed amplifier.
$47.21 List Price: $63.13You Save 25%
Usually ships in 6-10 business days.
RDL HD-FP1  HD Series Filler Panel

RDL HD-FP1 HD Series Filler Panel

RDL's HD-FP1 fills an unused half of a rack adapter or mounts in front of an RDL HD series product to prevent user adjustment or tampering.
$29.85 List Price: $39.93You Save 25%
Usually ships in 6-10 business days.
RDL HD-ASC1  HD Series Amplifier Security Cover

RDL HD-ASC1 HD Series Amplifier Security Cover

RDL's HD-ASC1 mounts to an RDL HD series mixer/amplifier to prevent user adjustment or tampering. The power button and associated indicators remain accessible with the HD-ASC1 installed.
$26.53 List Price: $35.46You Save 25%
Usually ships in 6-10 business days.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information