Radial Engineering JCR Guitar Reamp Device

Radial Engineering's Reamp® JCR™ is a passive Reamper™ that allows you to take a pre-recorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.

The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom-wound "Made in the USA" transformer and circuit. The latest Radial version features separate XLR and 1/4" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.

With today's unlimited track capabilities, Reamping is now accessible to everyone. And Reamping is no longer just for guitars… It is now common to Reamp bass, keyboards, drums, violin… you name it. In fact, Reamping is the magic ingredient that has brought many of the most esteemed recordings to life.

Features

• Lets you re-record tracks through a guitar or bass amp
• Original Reamp circuit designed by John Cuniberti
• Plug and play easy to use passive design
• Improves productivity while expanding creative options

Specifications

• Audio Circuit Type: Passive, transformer isolated
• Frequency Response: 20 Hz to 20 kHz (+0 db / -1 dB)
• Dynamic Range: 140 dB
• Total Harmonic Distortion: 0.001% @ 1 kHz, 0 dBu input
• Intermodulation Distortion: 0.0025% @ 1 kHz, -10 dBu input
• Phase Deviation: 2° @ 100 Hz; 0° @ 800 Hz
• Input Connectors: 1/4" TRS, XLR
  • Input Impedance: 1.8 kΩ
  • Common Mode Rejection Ratio (CMRR): -55 dB @ 55 Hz
  • Noise: -115 dBu
  • Max. Input Level: +26 dBu
• Output Connectors: 1/4" unbalanced
  • Output Impedance: 4.8 kΩ
• Features: 180° polarity reverse, ground lift, HPF, LPF, level control
• Construction: 14-gauge steel chassis and outer shell
• Conditions: For use in dry locations only, 5-40°C
• Dimensions (H x W x D): 2" x 3.3" x 5.0"
• Weight: 1.32 lbs (600g)