Kramer TP-575 1:2 HDMI Twisted Pair Receiver and Transceiver

The Kramer TP-575 is a twisted pair (DGKat) line driver and DA for HDMI encoded twisted pair signals. The unit receives a twisted pair signal and outputs both an HDMI and twisted pair signal to a compatible receiver.

Specifications

• Max Data Rate - 2.25 Gbps per graphic channel
• HDTV Compatible
• HDCP Compliant
• HDMI Support - HDMI (V.1.4 with Deep Color,x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD)
• DGKat Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
• 3DPass-Through
• EDIDPass Thru - Passes EDID/HDCP signals from source to display
• HPD Pass Thru - PassesHot Plug Detect signals from display to source
• Active Input/Output LED Indicators
• System Rnage - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m(230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723cable.
• Cable - For optimum range andperformance, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6,and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Output Signal Reclocking - Daisy chains up to 6 receivers for maximum range of 600m using shielded BC-DGKat723 cable at 1080i. (For other cables and resolutions, see System Range above.)
• Power Connect System - A single connection to the TP-575 powers the transmitter, receiver and line driver units.
• Compact MegaTOOLS- 2 units can be rack mounted side-by-side in a 1U rack space with optional RK-T2B universal rack adapter