Product Overview
Simple, fast setup in less than 30 seconds. Should feedback occur, a filter activates that kills ONLY the feedback, not the rest of the audio.
Features
- Performs like a very advanced set of automatic parametric filters
- Increased headroom and reduced noise floor
- Provides more gain before feedback (6 to 9dB typical)
- Transparent - leaves your sound clear and untouched
- Time required to find and eliminate feedback: 0.4 seconds, typical @ 1kHz
Specifications
- Filters
- 12 independent digital notch filters per channel, controlled automatically from 40Hz to 20kHz
- Filter width: user-controllable - either 1/10 or 1/5 octave, constant "Q"
- Resolution: 1Hz
- Time required to find and eliminate feedback: 0.4 seconds, typical @ 1kHz
- Number of Dynamic vs Fixed filters per channel: user selectable. Last configuration stored in memory.
- Input/output
- Input/Output Maximum Signal Levels: Balanced +18dBV peak,unbalanced +18dBV
- Output Drive: Unit will perform as specified driving a load> 600 Ohms
- Input Impedance: Balanced or unbalanced > 40kOhms, PIN 2high
- Output Impedance: Balanced or unbalanced 150Ohms nominal, PIN2 high
- Bypass: True power off bypass
- Headroom: 14dBV @ 4dBV nominal input, balanced
- I/O Connectors: XLR-3 and 1/4" TRS
- Performance
- Frequency Response: 20Hz - 20kHz +/-0.3dB
- Gain Matching: +/-0.2dB
- Spectral Variation: +0.25dB, 20Hz to 20kHz
- SND - Dynamic Range: >100dB
- THD: .005% at 1kHz < 0.01% 20Hz - 10kHz, < 0.025" 10kHz -20kHz
- Power Input
- 115VAC: 100-130VAC 50/60Hz
- 230VAC: 200-240VAC 50/60Hz
- Fuse
- 115 VAC, 0.1A, 10W, 0.160 A SB fuse
- 230 VAC, 0.06A, 10 W, 0.080 A T fuse
- Dimensions
- 1RU rack mount; 19" x 1.75" x 6.25" (rack mountable)
- Weight
- Operating Temperature
- Safe operating temperature: 5 to 122 degrees F