Sachtler 1265 System DV 12 SB Fluid Head, Mid-Level Spreader, Rubber Feet and Padded Bag

A tripod kit including a DV12SB fluid head + Tripod Speed Lock CF + Mid-Level Spreader 100/150 + rubber feet 100/150 + padded bag (ENG2).

DV12SB FLUID HEAD - The key to Sachtler's successful fluid heads is their step switching. Now their innovative SPEEDBALANCE technology enables even faster and finer counterbalance of your camera syste. By reducing the minimum payload, the head's overall payload range is increased.

The fluid head DV12SB is delivered with Touch & Go plate 16. It comes with a 1/4" screw and a 3/8" screw. Spare camera screws (1/4" and 3/8") and a pin screw are stored in the balance plate. The pin screw fits in the center hole of the camera plate. Thus a pin / 1/4" screw connection can be achieved if your camera requires this connection.

If your camera remains front- or back-heavy after going through the necessary centering procedure you man solve this by using the C.O.G. plate. This plate offers a removed position. The C.O.G. plate can be mounted to either the front or the back. It cannot be operated with pin and 1/4" screw.

DV12SB SPECIFICATIONS

• Weight: 6lbs
• Payload: 2.2-31lbs
• Silding Range - Plate: 2.8"
• Counterbalance: In 12 Steps
• Grades of Drag: 5 Each Horizontal and Vertical +0
• Tilt Range: +90/-75 degrees
• Temperature Range: -40 to 140 degrees F
• Camera Fitting: Touch & Go plate 16
• Tripod/Pedestal Fitting: 10mm bowl, integrated flat base fitting
• Pan Bar(s): 1, Type DV 100
• Level: Self-illuminating Touch Bubble
• Batteries Level: 3 x 625U or LR9
• The Speedlock CF is the fastest two stage tripod in the world. Simply release the three easy to reach clamps and the Speed Lock CF is ready for action. This extremely sturdy and twist-resistant carbon fiber tripod ensures that you're already shooting while others are still setting up.
• It takes just three quick movements and the Speed Lock CF is ready for action - and users don't even have to bend over. The patented claming system lets you adjust the tripod smoothly and safely, even with a camera mounted. The Speed Lock CF's carbon fiver constuction ensures minimal load-free weight, and increases stability and twist resistance. On top of that, the clamping connection forms a third tube to further increase stability. The ergonomically shaped, high-tech clamps have a rounded design which ensures that cables slide off without catching. In addition. you can tell at a glance whether the legs are clamped into position. The Speed Lock CF weights less than 6.6lbs, on a couple of hundred grams more than the ENG 2 CF, highly favored by camera crews all over the world. And if you need strength, the HD model has an amazing clamping force of 209lbs. These tripods are, of course, compatible with all existing 100mm accessories.

SPEED LOCK CF SPECIFICATIONS

• Weight: 6.6lbs
• Payload: 88lbs
• Height with Mid-Level Spreader: 19.7 - 59.4"
• Head Fitting: 100mm
• Transport Length: 27.6"
• Extension: 2-fold