Ashly KLR3200

KLR-3200

OUR PART #:  KLR3200 Write the First Review.

Our Price: $790.00
List Price: $990.00
You save 20%!
  • Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
  • Switch mode power supply provides high efficiency and low weight
  • Forced air cooled (front in, rear out)
  • Removable dust filters
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
In Stock
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

The Ashly KLR-Series amplifiers are high-efficiency, lightweight, two-channel, high power amplifiers incorporating the latest technologies delivering quality and value for professional performance at an extremely affordable price. Whether your application is professional audio or fixed performance installation, KLR amplifiers are optimized to provide reliable audio performance with sonic perfection.

Covering a power range from 1000 to 2500 watts per channel at 2 ohms (20Hz-20kHz, 1% THD), the KLR-3200 is perfectly suited for a wide range of sound reinforcement. It's optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a a uniform, rugged, 2RU chassis. Each KLR amplifier uses a state-of-the-art Switch Mode Power Supply, which assures you of flawless lows, punchy mids, and pristine highs. The output topography of the KLR-3200 is a two-step Class-H design. KLR-Series protection circuits include: output over-current protection, DC output protection, chassis internal temperature monitoring, inrush limiting, and a mains circuit breaker.

Front panel features include: individual input attenuators, signal, clip, and protect LEDs, air inflow vents with removable dust filters, power switch, and power LED. Rear panel features include: balanced inputs via 3-pin Euroblock, combo XLR/ 1/4" TRS connectors, Neutrik Speakon output connectors, 3-position gain switch (32dB, 26dB, or 1V input sensitivity), 3-position mode switch (bridged, stereo, or parallel mono), 3-position HPF switch (30Hz, 50Hz, or off), on/off limiter switch, air outflow vents, and permanently attached power cord.

Ashly KLR-3200 Features:

  • Balanced inputs via 3-pin Euroblock and combo XLR/ 1/4" TRS
  • Switch mode power supply provides high efficiency and low weight
  • Forced air cooled (front in, rear out)
  • Removable dust filters
  • Front mounted attenuators
  • Front panel indicators for output level, clip/protect, and power on/off
  • Gain selectable switch for both channels
  • Rack ears for permanent installation in a standard 2RU enclosure
  • Neutrik Speakon output connectors
  • 3-position gain switch (1V, 32dB or 26dB sensitivity)
  • 3-position mode switch (bridged, stereo or parallel mono)
  • 3-position HPF switch (30Hz, 50Hz or off)
  • On/off limiter switch
  • Permanently attached power cord
  • Extensive protection circuitry
  • Safety/Compliance: cCSAus, FCC, CE, RoHS

Ashly KLR-3200 Specifications:

  • Rated Power Output Per Channel(Stereo Mode, both channels driven)
    • 8 Ohms, 20 Hz - 20 kHz, 1% THD: 650W
    • 4 Ohms, 20 Hz - 20 kHz, 1% THD: 1100W
    • 2 Ohms, 20 Hz - 20 kHz, 1% THD: 1600W
    • 70V Output, 20Hz - 20kHz, 1% THD, per channel: 800W
  • Bridged Mono Mode: 4 Ohms, 20 Hz - 20 kHz, 1% THD 3200W
  • Line Current Draw (all channels driven @4Ohms)
    • Idle: 0.92A
    • 1/8th Power Pink Noise 11.4A
    • 1/3 Power Sine Wave 16.6A
    • S/N (20 Hz-20 kHz, unweighted): >109dB
  • Thermal Dissipation (all channels driven @4Ohms)
    • Idle (BTU/hr): 136
    • 1/8th Power Pink Noise (BTU/hr): 2063
    • 1/3 Power Sine Wave (BTU/hr): 3001
  • Input Gain Switch 1V, 26dB, 32dB
  • Signal to Noise Ratio (20Hz-20kHz, rated power @ 8 Ohms unweighted): >109dB
  • Output Circuitry: 2 Step Class H
  • Weight 26.4 lbs (10.9kg)
  • Frequency Response 1W @ 8 Ohms 20Hz – 20kHz (-3dB down point): +0.3dB 5Hz – 70kHz
  • Damping Factor – 100Hz @ rated power @8 Ohms:> 380
  • THD 20Hz-20kHz: 10dB below rated output @ 4Ohms
  • Input Impedance: 12 kOhm, balanced
  • High Pass Filter: 30Hz, 50Hz, Off (12dB/Oct)
  • Amplifier Protection: Output Overcurrent, DC Output,Chassis Temperature, Mains Breaker
  • Cooling: Variable Speed Fan, Front-to-Rear AirFlow
  • Front Panel Indicators: Protection/Clip, Signal,Power
  • Attenuators: Per Channel, Front Panel
  • Input Connectors, each channel: 3-pin Euroblock, XLR, ¼”TRS Phone Jack
  • Output connectors, each channel: Four-pinSpeakon-type
  • Operating Temperature/Humidity Temperature: -10C to +40C/ Humidity: 0% to 90%
  • Power Cable Connector: 3-prong NEMA 5-15
  • Dimensions: 19" W x 3.5" H x 16" D (482 x88 x 407 mm)

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information