Call Us for your best package
pricing and product availability.
OUR PART #: FLAMEX-WD MFR #: 150079WD0128
Use Flamex WD to treat wood and cellulosic materials ... Read more
Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.
Email customer service
Use Flamex WD to treat wood and cellulosic materials. Plywood, board stock, sheet goods, hay, acoustical tile and other common materials can all be rendered flame retardant with Flamex WD. After the Flamex treatment has dried fully, wood materials can be painted or stained without affecting the flame retardance.
Rosco Flamex WD has been premixed and does not require any further dilution. The method of application and the amount of Flamex required for sufficient treatment varies with the materials in use.
One gallon of Flamex WD will treat approximately 150-200 square feet (14-18.5 square meters) of material.
Applying Flamex:
The absorption rate of the wood or cellulosic materials being used may dramatically affect proper flame retardance. Make sure you test for effective flame retardance.
Flamex WD has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class B.
Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.
DISCLAIMER: Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Click to download