Gefen EXT-CAT5-1600HD Extender DVI KVM USB

Extend DVI and USB 2.0 peripherals with the Gefen CAT5-1600HD KVM extender using two CAT-5e/CAT6 cables. The unit includes a built-in 4-port USB 2.0 hub located on the Receiver unit and gives complete computer access control at the remote location.

Gefen Inc. EXT-CAT5-1600HD Includes:

• Cat5-1600HD sender unit
• Cat5-1600HD receiver unit
• 6 foot DVI to DVI cable
• 6 foot USB 2.0 cable
• Two 5V power supplies with locking power connectors
• Set of rack ears.

Gefen Inc. EXT-CAT5-1600HD Features:

• Extends any DVI compliant device up to 200 feet (60 meters) from the computer at 1920x1200
• Extends USB 2.0 compliant devices up to 300 feet
• DVI is transmitted in digitally for zero signal loss over CAT5 cable
• Supports video resolutions up to 1080p and 1920x1200
• HDCP complaint for viewing for copy-protected video content (i.e.,Blu-ray)
• Supports DDWG standard for DVI compliant monitors
• Supports legacy USB1.1 devices
• Includes rack ears.

Gefen Inc. EXT-CAT5-1600HD Specifications:

• Video Amplifier Bandwidth: 164 MHz
• Single Link Range: 1080p, 1920x1200
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• DVI Connector: DVI-I (29 pin) female (DVI-D digital signal only)
• USB Input (sender): USB type "B" connecotr
• USB Output (receiver): four USB type "A" connectors
• Link Connectors (2): RJ-45 Shielded
• Power Supply: 5V DC / 1A each
• Power Consumption: 10 Watts (max.) per power supply
• Dimensions (WxHxD): 17" x 1.75" x 4.375"

Note

NOTE: The Gefen CAT5-1600HD is HDCP compliant, enabling the viewing of protected content on the remote extended display. It supports digital DVI-D only, not analog DVI-A. Sources and connecting cables must be DVI-D compatible.