Product Overview
The CMS 1201DC is a powerful state-of-the-art large format in-ceiling loudspeaker device conceived, designed and built to complement Tannoy’s existing class-leading CMS range. From the pioneers of point source and large format ceiling speakers the CMS 1201DC is engineered from the ground up with superior full-range performance in mind to handle demanding distributed sound applications such as ballrooms, shopping malls, sports halls, airports and other high ceiling installations.
Built around a brand new evolution of the high power handling 12” (300mm) Dual Concentric™ point source driver, the CMS 1201DC delivers best-in-class performance for the most even beamwidth and pattern control over the widest range of frequencies of any large format ceiling speaker. Coupled with exceptional clarity, ultra low distortion, and high SPLs, Tannoy has again raised the bar to give the absolute cutting edge performance in ceiling mounted loudspeaker technology.
The new Dual Concentric drive assembly features a treated mid-bass cone and double rolled cambric surround for high sensitivity, as well as a 1.34” (34mm) aluminium dome with ferrofluid cooled Neodymium magnet assembly and a newly designed waveguide for the high frequency unit. These two drivers seamlessly merge into one with the high frequency mounted in the throat of the mid-bass; coincidentally aligning both transducers to a point source. The result is a smooth, uniform response over a very controlled 90 degree coverage area – even in the highest octaves.
FEATURES
- Achieving new standards of full bandwidth coverage control means that the CMS 1201 can be specified in distributed designs with absolute confidence and located as efficiently as possible, minimising the number of devices typically required to cover a given area, reducing install time and cost. All Tannoy ceiling loudspeakers are simple to design into a wide variety of applications using our Ease Address™ design software. Available to download from the Tannoy website, the software calculates the optimum spacing and performance with the input of some simple parameters. Not just another manufacturers ‘wizard’, you have the confidence that you are using independently measured data, within a well respected simulation package. Better still – its free.
- Defining new benchmarks in acoustic performance is only part of the CMS 1201’s story. As a result of Tannoy’s continuing efforts to listen and respond to the specific needs of consultants, integrators and contractors, the CMS 1201 delivers on the demands for versatility, ease of installation, and long-term continuous reliability.
- Each device comprises of 3 discrete components: the loudspeaker assembly (mounted on ported steel baffle), a separate 79 litre (2.8 cubic feet) steel back-can with multiple mounting points and a white powder-coated steel grille and moulded bevel cover.
- The custom engineered powder coated steel back-can has been designed to cater for all conceivable installation possibilities making the CMS 1201DC extremely versatile. Internally dampened with 11m OSB2 board, the addition of the back-can provides exceptional low frequency performance on a par with conventional wooden enclosure loudspeakers – but from an in-ceiling format. Steel mounting lugs allow for fitting to a Unistrut roof rail system in a variety of configurations both directly or via secondary prefixed cross struts. The device can also be hung via 4 top-mounted eye bolts, or as a further alternative, the design also caters for a single point central hang via M10 or 3/8 UNC screwed rod – made easy thanks to the slotted mounting saddle on the top of the back-can.
- Mounting of the loudspeaker assembly to the pre-installed back-can is a one man job thanks to the common sense design approach. One edge of the baffle clips onto the steel box to hold it in place while the installer secures the assembly in place. Connection is simple via terminal barrier strips inside the can, easily accessible via 20mm and 29mm conduit knockouts on all 5 sides of the can. Saving time and man-power during installation has been a driving factor behind the design of the CMS 1201 system.
- The CMS1201DCT is equipped with a low insertion loss 60W line transformer for use on 70V or 100V distributed lines. The following tappings are configurable on the transformer before screwing driver assembly into the back can:
- 70V systems: 60W / 30W / 15W / 7.5W / OFF
- 100V systems: 60W/ 30W/ 15W/ OFF
- If later adjustment to the level is required the baffle can be hung from the can via a hinged edge, leaving both hands free to make the required adjustment.
- Tannoy’s focus on maintaining the highest standards of continuous product performance and reliability, through uncompromising quality control of components and manufacturing processes, means you can specify and install CMS 1201DC with confidence. As with all of Tannoy’s CMS in-ceiling loudspeakers, theCMS 1201DC benefits from a 5-year warranty.
- [See the attached data sheet for specifications]
