Product Overview
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1800 watts of 120V AC power to 2 GFCI protected AC outlets from any 12V battery or automotive DC source. Includes a set of nut-and-bolt style DC terminals for simple installation. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level.
Key Features
- Allows users to run AC appliances from a properly sized 12V battery or automotive DC system
- Converts 12V DC battery power to 120V AC power
- 1800W continuous output power, 3600W peak output power (instantaneous)
- 2 GFCI protected outlets (Ground Fault Circuit Interrupter)
- Ultra-compact, lightweight design with grooved surface for efficient cooling, all-metal housing
- Diagnostic LEDs indicate low batter voltage level and load level
- Low battery alarm with auto-shutoff prevents deep battery discharge
- High-efficiency operation conserves batteries to prolong run time
- Cooling fan regulates internal temperature and prolongs unit service life
- Remote Control Capability
- RoHS compliant
- Output
- Frequency Compatibility: 60Hz
- Output Volatge Regulation: Maintains PWM sine wave output voltage of 115VAC (+/- 8VAC)
- Output Frequency Regulation: 60Hz (+/-3Hz)
- Overload Protection: Automatic overload protection shuts down inverter system in the event of overloads
- Outlet quantity/type: 2 AC outlets (GFCI protected)
- Input
- Recommended Electrical Service: Requires 12VDC input source capable of delivering 200A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 250A battery fusing is recommended
- Maximum Input amps/watts: Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown
- Input Connection Type: Set of 2 DC bolt-down wiring terminals. User supplies cabling, minimum gauges for full load operation: 0 (16ft max), 00 or 2/0 (20ft max)
- LED Alarms & Switches
- Dual-function alarm indicates overload conditions or low DC input voltage of 10.5V or less.
- Physical
- Shipping Weight: 8lbs
- Cooling Method: Fan
- Unit Dimensions: 4 x 6 x 15
- Material of Construction: Aluminum / Sheet Metal
- Form Factors Supported: Mounting slots enable permanent placement of inverter on any horizontal surface