TOA SC-630 30W Paging Horn Speaker

TOA SC Series paging horn speakers provide intelligible voice paging and tone signaling for indoor and outdoor sound system applications. Fully weather-resistant for reliable operation in demanding environmental conditions, SC Series models are available with a choice of power ratings from 10W to 50W.

The SC-630 (30W, 8Ω) is a low impedance model. The SC Series are easy to install in wall, pole or ceiling-mount applications and include corrosion-resistant stainless-steel mounting hardware. The SC Series models are also designed for intercom talk-back applications requiring dual operation as both a microphone and speaker.

Each model is a double re-entrant horn with compression driver for high sensitivity and a lightweight aluminum enclosure. The loud-speaker diaphragm is heat and moisture-resistant to prevent deformation and extend operation. The SC Series are also IP-65 standards compliant for dust and moisture-resistance with a wide operating temperature range from -4°F to 130°F. The SC Series Paging Horn Speakers are backed with a five-year warranty.

Applications:

• Boats
• Churches
• Drive-Thru
• Industrial
• Mobile Vehicles
• Parking Facilities
• Parks
• Schools
• Security
• Sporting Facilities
• Swimming Pools

Features:

• Paging Horn Speaker for voice paging and tone signaling distribution.
• Weather-Resistant to withstand demanding environmental conditions.
• Double Re-Entrant Horn with Compression Driver
• Controlled Dispersion
• High Sensitivity: up to 113dB (1W/1m).
• Usable as a Microphone for intercom talk-back applications.
• Lightweight, Sealed, Aluminum Enclosure prevents moisture damage.
• Cable Strain-Relief
• IEC IP-65 Standards Compliant for dust and moisture-resistance.
• Wide Temperature Range: -4°F to 131°F
• Phenolic Loudspeaker Diaphragm prevents deformation from heat and moisture.
• Stainless-Steel Mounting Bracket for easy installation and aiming in wall, pole or ceiling-mount applications.
• Five-Year Warranty

Specifications:

• Rated Input: 30W (Mobile Mount use: 15W)
• Rated Impedance: 8Ω
• Sound Pressure Level: 113dB (1W, 1m @ 500Hz to 2.5kHz peak level)
• Frequency Response: 150Hz - 20kHz
• Sensitivity when used as Microphone: -20dB @ 1kHz
• 10dB = 1mW / 1O dynes / cm²
• Dust / Water Protection: IP65
• Polarity Hot: Black, Com: White
• Operating Temperature: -20°C to +55°C (must be free from dew condensation)
• Finish Horn flare: Aluminum, off—white, powder coating
• Reflector horn and rear cover: ABS resin, off—white
• Bracket, screws and bolts: Stainless steel
• Speaker cable: Polyvinyl chloride insulated cabtyre cable
  • (6mm in diameter, 600mm in length)
• Dimensions: 285mm (W) X 227mm (H) X 277mm (D)
• Weight: 1.7kg
• Note: Avoid installing the speaker in locations which vibrate considerably, or under environments easy to be oil-contaminated.