Product Overview
The ETA-15SH is a single housing unit for 15A lines. Features 2 outlets that support AC spike and surge suppression, AC mains voltage monitoring, EVS circuitry, and remote activation. It also supports current monitoring and EMI/RFI filtering for applications where they are used individually.
Applications
The ETA-15SH is designed to be flexible for use in a variety of applications. When used with a sequenced controller it allows the turning of equipment on and off from a remote location to save energy and to reduce an in-rush of current that stresses the main AC line. It also can be used as a standalone unit for protection against voltage surges and applies EMI/RFI filtering to clean up the AC power at the load source. The following are just a few examples of applications in which the ETA-15SH can be used:
- Restaurants
- Houses of Worship
- Schools
- Home Theaters
- Office Buildings
- Sports Bars
- Industrial Facilities
Features
- 2 Outlets, 15A
- RFI/EMI noise filtering
- Spike & Surge suppression, DCS circuitry
- Extreme Voltage Shutdown (EVS) below 101V or above 132V AC line
- AC Fault indicator
- Fuse protection @ 15A slow blow
- Manual bypass switch
- Incoming AC presence LED
- Active outlet LED
- Status signals output for voltage and current
- Compact to fit behind flat screens
Specifications
- Type: AC Power Conditioner & Suppressor Module
- Power Requirements: 120V 60Hz
- Power Consumption: .5W
- RoHS Compliant: Yes
- Switched Outlets: Two, 15A
- Spike & Surge Suppression: H-N, N-G, H-G
- Manual Override: Slide switch
- Extreme Voltage Shutdown (EVS): Below 101V or Above 132V AC line (when used with ETA-ECS6RM)
- Connectors: 5 position Phoenix Euro Block Style
- Fuse Protection: 15A slow blow
- DCV Remote Trigger: 5-24DCV
- Remote Tribber: SPST Contact
- Status Signals: Output for voltage and Current Data (all signals are low voltage and low current)
- Indicators: Incoming AC, Active, AC Fault
- Power Cord: 9', 14-gauge
- Current Rating: 15 amps
- Operating Voltage: 102 to 132 VAC
- High Voltage Surge Protection: Trigger at 133VAC, 1ms typically (when used with ETA-ECS6RM)
- Spike & Surge Suppression: H-N, N-G, H-G
- Low Voltage Protection: Trigger 101 VAC, 1ms Typically (when used with ETA-ECS6RM)
- Spike Protection Modes: Circuitry on incoming AC mains
- Minimum Spike Clamping Voltage: 460 VRMS @ 3,000 amps
- Maximum Spike Clamping Voltage: 6000V
- Maximum Spike Clamping Response Time: 1 nanosecond
- Spike Clamping Voltage @ 100A: 1250Vp for 20µs
- Maximum Surge Current: 6,500 amps
- Energy Rating @ 2ms: 600 Joules
- Noise Attenuation EMI/RFI Sequencer: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz
- Temperature Range: 5° to 35°C
- Humidity Range: 5% to 95% R.H.
- Chassis Finish: Black
- Mounting: Side bracket adjustable
- Dimensions (H x D x W): 1.75" x 8.5" x 5.0"
- Weight: 4.5 lbs
- Agency Listings: MET (UL1449 Code)
