Lightronics XC42 4-Channel Portable Dimmer with DMX, 1200W per Channel

The Lightronics Inc. XC-42 is a four circuit compact dimmer with a load capacity of 1200 Watts per circuit. Each circuit is protected by a 10 Amp fuse. It can be controlled in several ways - the most common being DMX-512. Other control modes are also provided for stand alone operations. These include individual channel control and chaser functions. Individual circuits may be operated as non-dim (relay) circuits. Individual circuits may be set for one of several response curves and may be limited to less than full intensity. In addition to full soft patch capability there is a quick pack address function which enables rapid setup. The XC-42 can optionally be provided with a wireless DMX receiver.

Lightronics Inc. XC-42 Portable Dimmer Features:

• LED Digital Display
• 4 Channels
• 1200W per Channel
• Softpatch (each dimmer)
• Dimmer Limiting
• Dimmer Curve Selection
• Architectural Interface AMX/Crestron Interface
• DMX-512 Protocol
• 8 Built in Chases
• Relay Mode Switchable
• Fuses
• Edison Outputs
• 120V

Lightronics Inc. XC-42 Portable Dimmer Specifications:

• Channels: 4
• Channel Capacity: 1200 Watts per Channel
• Total Power: 4800 Watts
• Control Protocol: DMX-512, RS-485, Architectural, Optional Wireless DMX
• Control Connections: Dual 5 Pin XLR
• Power Requirements: 120VAC, Two 20 Amp Circuits
• Power Input: Two Edison Plugs
• Frequency: 50 or 60Hz
• Fusing: 10 Amp each Channel
• Preheat Voltage: Soft Start Control
• Response Curve: Incandescent Bulbs, LED, Fluorescent, Relay Mode
• Filter Rise Time: 350 Microseconds
• Filter Max. Rate of Rise: 105 Milliamps / Microsecond
• Full Load Voltage Drop: 3 Volts
• Efficiency: 97%
• Size (LxWxD): 11” x 7” x 2 5/8”
• Weight: 6.7 Pounds