Product Overview
The AT4050ST from Audio-Technica brings you the realism of a live sound field. It's a stereo, side-address condenser microphone that features independent cardioid and figure-of-eight elements, all configured in a Mid-Side arrangement. It's an innovative mic that allows sound recordists the choice of selecting either a left-right stereo output or discrete Mid-Side signals for later manipulation — notable versatility. The mic’s dual-diaphragm capsules maintain a precise polar pattern definition across the full frequency range. Plus, its transformerless circuitry virtually eliminates low-frequency distortion.
Includes
- AT4050ST stereo condenser mic
- AT8449 shock mount for ⅝"-27 threaded stands
- ⅝"-27 to ⅜"-16 threaded adapter
- Microphone dust cover
- Protective carrying case
Features
- Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
- Independent cardioid and figure-of-eight condenser elements
- Switch selection of Mid-Side mode and two internally matrixed stereo modes
- Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Integral 80Hz high-pass filter switch and 10dB pad switch
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Custom shock mount provides superior isolation
Specifications
- Element: Externally-polarized (DC bias) condenser
- Polar Patterns: Cardioid, and Figure-of-eight
- Frequency Response: 20 - 18,000Hz
- Low Frequency Roll-Off: 80Hz, 12dB/octave
- Open Circuit Sensitivity:
- Stereo, 90°: -42dB (7.9mV) dB re 1V @ 1Pa
- Stereo, 127°: -41dB (8.9mV) dB re 1V @ 1Pa
- Mid: -36dB (15.8mV) dB re 1V @ 1Pa
- Side: -36dB (15.8mV) dB re 1V @ 1Pa
- Impedance: 50Ω
- Maximum Input Sound Level:
- Mid and Side: 149dB SPL, 1kHz @ 1% T.H.D.
- 159dB SPL, with 10dB pad (nominal)
- Noise:
- Stereo, 90°: 25dB SPL
- Stereo, 127°: 16dB SPL
- Mid: 15dB SPL
- Side: 17dB SPL
- Dynamic Range (typical): Mid: 134dB, 1kHz @ Max SPL
- Side: 132dB, 1kHz @ Max SPL
- Signal-To-Noise-Ratio:
- Stereo, 90°: 69dB, 1kHz @ 1Pa
- Stereo, 127°: 78dB, 1kHz @ 1Pa
- Mid: 79dB, 1kHz @ 1Pa
- Side: 77dB, 1kHz @ 1Pa
- Phantom Power Requirements: 48VDC, 6.4mA typical (both channels total)
- Switches:
- 90° / 127° M-S
- Flat, roll-off;
- 10dB pad (nominal)
- Weight: 18.2oz. (517g)
- Dimensions (L x max. body diameter): 7.60" x 2.10" (193.0 x 53.4mm)
- Output Connector: Integral 5-pin XLRM-type
- Note: further information can be found within the items located under the "Documentation" tab above.