Bogen RIO1S Transformer-Balanced Relay Input/Output Module

Bogen's RIO1S is a multi-functional module with a priority-controlled relay contact, transformer-balanced input, transformer-balanced output, and an RJ11 output for direct connection to the override input of a zone paging system.

The RIO1S provides a convenient way to integrate a Power Vector amplifier with a PCM zone paging system, allowing full use of the Power Vector's priority structure in zone paging applications for more sophisticated paging capabilities.

Bogen Communications RIO1S Features:

• Transformer-isolated, balanced line-level input
• 600 ohm or 10k ohm (jumper selectable) input impedance
• Transformer-isolated, balanced line-level output
• 8 ohm, 0.75W output
• Input and output level controls
• Relay responds to jumper selectable priority level
• N.O. or N.C. jumper-selectable relay contact
• External control of priority muting buses
• Input can be muted from higher priority modules, with signal fade back.
• Output (normally gate) can be synched with priority relay operation
• Output gating can be defeated via jumper
• RJ11 connection with line output and dedicated N.O. relay contact (allows easy connection to O/R port of Bogen telephone paging interfaces)

Bogen Communications RIO1S Specifications:

• Gain:
  • Input: -11dB to +19dB
  • Output: OFF to 0dB/+7dB (8 ohm/600 ohm load)
• Frequency Response:
  • Input: 10Hz to 40kHz (+0/-3dB)
  • Output: 30Hz to 20kHz (+0/0.5dB) with 8 ohm load, 0.75W
• Distortion:
  • Input: 600 ohms/10k ohms (jumper selectable), balanced
  • Output: 8 ohms minimum, balanced
• Priority:
  • Input: Mute Low (jumper defeatable)
  • Output: Three Levels (normally gated)
• S/N (20Hz-20kHz: -75dBV
• Muting: >50dB
• Controls: Level IN, Level OUT
• Connectors: Screw terminals and RJ11
• Power: +/-24V DC
• Weight: 4.1 oz
• Dimensions (W x H x D): 1 3/8" x 3 1/8" x 3 1/2"