CAD Audio 878HL-2 Omnidirectional Desktop Microphone with Locking Push-to-Talk

The CAD Audio 878HL is a dual impedance, omnidirectional dynamic microphone offering modern styling and features in a rugged Cycolac housing for all industrial and commercial public address and paging applications. A slight rise above 200Hz gives the 878HL a natural and highly intelligible sound. The 878HL offers a long life DPDT leaf switch with three types of switch activation; a momentary push bar, a locking on/off switch and lift-to-talk operation. The 878HL is manufactured to take abuse and retain its performance and appearance over a long life. Four molded, non-skid, non-marring, permanently resilient shock isolation "feet" are located under the base. The high or low impedance selector switch is located on the bottom of the microphone. The 878HL is supplied with 7 ft of four conductor, two shielded, cable wired normally open for relay control. If a line-shorting switch function is desired, the 878HL can be easily rewired in the field.

Features

• Omnidirectional Pick-up
• Push-to-talk with locking switch
• Stripped and tined cable
• Hi or Low impedance output
• External Contact Closure

Specifications

• Operating Principle: Moving coil dynamic
• Polar Pattern: Omnidirectional
• Frequency Response: 80Hz-12kHz
• Sensitivity HiZ: -43 dBV (7.2 mV) @ 1 Pa
• Sensitivity LoZ: -56 dBV (1.0 mV) @ 1 Pa
• Impedance HiZ: 40k ohms
• Impedance LoZ: 400 ohms