Audix MB8455HC MicroBoom 84" Carbon Fiber Boom Arm with M1255B Hypercardioid Mic

The elegant solution for any hard to reach miking application including choir, live theater, and orchestra.

The MB8455HC MicroBoom™ System is an 84-inch black carbon fiber rod with an Audix M1255BHC high-output miniaturized hypercardioid condenser microphone attached. A high-quality shielded cable is used internally for the cleanest signal path from the mic to the boom end. A flexible gooseneck at the mic end of the boom and a stand adapter with angle and rotation adjustments allow precise positioning of the microphone.

The Microboom™ provides exceptional performance and portability with an ultra-clean, professional appearance on stage.

Audix MB8455HC Applications:

Choir

Ensemble vocal

Theatre

Orchestral zone miking

Location recording

Presentation

Conference room

Audix MB8455HC Includes:

• 1 x Carbon Fiber 84” Boom – Black
• 1 x M1255BHC Microphone – Black
• 1 x Clutch Assembly
• 1 x High-Quality 25’ XLRM-mini XLRF Shielded Mic Cable
• 1 x Windscreen

Audix MB8455HC Features:

• MicroBoom™84
  • Clean, elegant appearance
  • Choice of capsules
  • Available in Black or White finish
  • No external power needed
  • Designed, assembled & tested in the USA
• M1255BHC
  • Small, lightweight, low profile
  • Miniaturized preamp circuitry
  • No external power adapter needed
  • 12 mm gold vapor diaphragm
  • Immune to RF interference
  • Extremely low noise, high SPL handling
  • Designed, assembled, manufactured & tested in the USA

Audix MB8455HC Specifications:

• MicroBoom™84
  • Rod Material: Carbon Fiber
  • Gooseneck: Flexible Steel
  • Length: 2134 mm (84")
  • Diameter: 7.4 mm (0.2")
  • Connections: mini-XLRm (bottom) mini-XLRf (top)
  • Weight: 111 g (4 oz)
  • Finish: Black
• M1255BHC
  • Transducer Type: Condenser
  • Frequency Response: 50 Hz – 19 kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 150 ohms
  • Sensitivity: 32 mV / Pa @ 1k
  • Equivalent Noise Level: 21 dB (A-weighted)
  • Signal to Noise Ratio: 73 dB
  • Maximum SPL: ≥ 130 dB
  • Power Requirements: 18 – 52 V
  • Connector: 3 pin mini-XLRm
  • Material: Machined brass
  • Finish: Black
  • Weight: 16 g (0.56 oz)
  • Length: 54 mm (2.1")