Product Overview
The Audio Technologies Inc Series 2 Digital Audio Distribution Amplifiers give you new features and flexibility. Now you can distribute digital audio at up to 192kHz sample rates with incredibly low jitter and ultra-short propagation delay. Switchable inputs let you choose from multiple input streams. Selectable reclocking lets you precisely regenerate a pristine input signal or handle Surround-encoded audio. Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer displays tell you your audio is clean or let you know why it's not. Push-button input EQ optimizes for long input cables. Loop-thru connectors let you stack units for even more outputs or seamlessly insert a DA into your digital workflow.
Audio Technologies Inc DDA-106XLR Features
- Sample rates from 27 to 192kHz
- Word Lengths from 16 to 24 bit
- Lowest jitter,
- Propegation delay
- Selectable Re-clocking, Surround capable
- Loop-thru inputs with switched termination
- Input sample rate indicators
- Input word length indicators
- Fault diagnostic indicators
- Pro/Consumer Mode indicator
- Automatic Input EQ for long line lengths
- Front Panel Lockout
- Input:
- Connectors: XLR female; paralleled input connectors for loop-thru expansion
- Level: 0.2Vp-p minimum
- Impedance: Transformer isolated, balanced and floating, 110 ohms; terminating resistors may be switched in or out via front panel control
- Sampling Frequency: 27 to 192kHz
- Cable Length: >1000 feet of 110 ohm cable with equalizer; 75 ohm coax allows longer runs
- Equalizer: Automatic EQ for long lines via front panel push button
- Clock: Regenerated from input signal with dual mode PLL or non-relocked to preserve Surround coding; switchable
- Outputs:
- Connectors: 6 XLR male
- Level: 4Vp-p loaded
- Impedance: 110 ohms, balanced and transformer isolated
- Output Jitter: < 0.3 nanoseconds peak to peak
- Propagation Delay: < 25 nanoseconds
- Indicators:
- Input Termination: On, Off
- Input Sample Rate: 32, 44.1, 48, 88.2, 96, 176.4, and 192 kHz
- Input Word Length: 16, 18, 20 and 24 bits
- Input Digital Errors: Bi-Phase/Parity, Validity, Non-Linear PCM, DTS-CD Signal
- Re-Clocking: Off, On
- Mode: Pro, Consumer
- Input Cable EQ: Locked, Enabled
- Input Select: 1, 2
- Power: LED follows power transformer and full wave bridge
Audio Technologies Inc DDA-106XLR Specifications:
- Power: Internal Supply, 115/230 VAC (selectable via internal jumper) +/-10%, 50/60Hz, 10VA, IEC320 3-pin connector
- Size: 19" W x 1.75" H x 8.5" D; 1RU package
- Weight: 7 lbs net; 9 lbs shipping
- Warranty: Limited, one year warranty