Ashly 3.6SP 3x6 Speaker System DSP Processor

The Ashly Protea™ 3.6 Signal Processor provides crossover, EQ, Comp/Limiter plus delay effects that are easily accessed from the front panel or configured with your PC. A third input is a bonus

Features

• XLR Input and Output
• Front panel parameter control
• Highly intuitive user interface
• Assign outputs to any input
• USB and RS-232 interface

Specifications

• Input: Active Balanced, 18 kOhms
• Max Input Level: +20dBu
• Input Gain Range: +12/-40dB, 0.1dB increments
• Output: Active servo balanced, 100 Ohms
• Max Output Level: +20dBu
• Output Gain Range: +12/-40dB, 0.1dB increments
• Polarity: 0° or 180°
• Frequency Response: 20 Hz - 20 kHz, ±0.25dB
• THD: < 0.01% @ 1 kHz, +20dBu
• Dynamic Range: > 110dB (20 Hz - 20 kHz) unweighted
• Output Noise: < -90dBu unweighted
• EQ Filters: 6 per input, 4 per output
• Parametric EQ Bandwidth: 1/64th Octave to 4 Octave
• Parametric EQ Range: +15/-30dB, 0.1dB increments
• Frequency Resolution: 1/24th Octave
• High-Shelf EQ Slope: 6 or 12dB/Octave
• High-Shelf EQ Frequency Range: 19.7 Hz to 2 kHz
• High-Shelf EQ Range: ± 15dB, 0.1dB increments
• Low-Shelf EQ Slope: 6 or 12dB/Octave
• Low-Shelf EQ Frequency Range: 3.189 kHz to20.159 kHz
• Low-Shelf EQ Range: ± 15dB, 0.1dB increments
• Maximum Input Delay: 682ms, 20uS increments
• Maximum Output Delay: 682ms, 20uS increments
• Delay Increment: 20uS

Note:

For full specifications on this product, please refer to the attached Data Sheet under the Documentation Tab.