RDL EZ-PA20

10W RMS/Channel @ 8 Ohms Stereo Amplifier

OUR PART #:  EZ-PA20 Write the First Review.

Our Price: $139.00
List Price: $185.94
You save 25%!
  • Audio Amplifier with Front-Panel Level Control
  • 10 Watts RMS Per Channel into 8 Ohms
  • 8 Watts RMS Per Channel into 4 Ohms
  • Switch-Selectable Load Impedance on Rear Panel
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 11-15 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than a standard amplifier. The outputs drive 4 or 8 ohm speakers.

Applications:

  • Houses of Worship
  • Restaurants
  • Clubs
  • Meeting Rooms
  • Educational Facilities
  • Conference Rooms
  • Commercial Sound Systems

Includes:

  • Power Supply

Radio Design Labs EZ-PA20 Features:

  • Audio Amplifier with Front-Panel Level Control
  • 10 Watts RMS Per Channel into 8 Ohms
  • 8 Watts RMS Per Channel into 4 Ohms
  • Switch-Selectable Load Impedance on Rear Panel
  • Unbalanced Line Input on RCA Jacks
  • Switch-Selectable Mono or Stereo Mode
  • Integral Overload Limiter with LED Indicator
  • Limiter Controls Overloads from Clipping

Radio Design Labs EZ-PA20 Specifications:

  • Input: > 10 kOhm, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 Wout), +22 dBV max.
  • Gain: Off to 32 dB
  • Outputs (2): Left and Right, 10 Watts RMS into 8 Ohms per channel or 8Watts RMS into 4 Ohms per channel, switch-selectable output impedance
  • Frequency Response: 35 Hz to 20 kHz (±1.5 dB, 10 Watts)
  • THD+N: < 0.25%
  • Crosstalk: < -68 dB (1 kHz)
  • Phantom: Switch-selectable 24 V (IEC 1938: 1996-12)
  • Noise: < -70 dB (below 10 Watts)
  • 24 Vdc power supply current: 160 mA (idle), 1000 mA (max.)
  • Power supply input voltage: 100 to 240 VAC
  • Warranty: 3 Years; contact RDL technical support department for assistance
  • Case dimensions: 5.75" W x 5" D (14.6 x 12.7 cm)
  • Mounting size: 1/3 rack width
RDL PS24KS  24V @ 1000mA Power Supply

RDL PS24KS 24V @ 1000mA Power Supply

Typical Performance: Input: 100 to 240 VAC Output: 24 Vdc, 1 A (UL, CSA) Dimensions: 1.80" x 3.51" x 1.55" (4.6  x 8.9 x 3.9 cm) Efficiency: ENERGY STAR Level IV
$31.29 List Price: $41.85You Save 25%
In Stock
RDL EZ-SMB2  Surface Mount Bezel 1/3 Rack

RDL EZ-SMB2 Surface Mount Bezel 1/3 Rack

Surface mount bezel for 1/3 rack width EZ products.
$29.94 List Price: $35.33You Save 15%
In Stock
RDL EZ-UCB2 Under Counter Bracket

RDL EZ-UCB2 Under Counter Bracket

The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths.Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy AlignmentEZ Product Secures Quickly Using Two ScrewsBrackets Fasten to Underside ...
4.0 / 5 ★★★★★
$19.63 List Price: $23.16You Save 15%
In Stock
RDL EZ-RA6  Rack Adapter

RDL EZ-RA6 Rack Adapter

Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
$48.31 List Price: $64.62You Save 25%
Usually ships in 4 business days.
RDL EZ-DC2 Desktop Chassis 1/3 Rack

RDL EZ-DC2 Desktop Chassis 1/3 Rack

Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
$46.79 List Price: $62.57You Save 25%
Usually ships in 6-10 business days.
RDL EZ-SD2  1/3 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

RDL EZ-SD2 1/3 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

Features: Use In Place of Filler Panel(s) Holds Adapters and Cables Mount in EZ-CC6 or EZ-RA6
$29.45 List Price: $39.38You Save 25%
Usually ships in 4 business days.
RDL EZ-SD1  1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

RDL EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
$28.23 List Price: $37.76You Save 25%
Usually ships in 6-10 business days.
RDL EZ-FP1  Filler Panel, 1/6RU

RDL EZ-FP1 Filler Panel, 1/6RU

Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
$9.82 List Price: $11.58You Save 15%
Usually ships in 6-10 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information