DBX ZONE-PRO-1260M

ZonePRO 1260m 12 In x 6 Out Digital Zone Processor

OUR PART #:  ZONE-PRO-1260M

Write the First Review.
Our Price: $849.00
List Price: $1,062.00
You save 20%!

SPECIAL FINANCING AVAILABLE

Pro Buyer Card
$18/month for 48 months
0% Interest for 48 Months! ‡‡ Learn More
In Stock
  • 12 inputs/6 outputs
  • 6 balanced mic/line inputs
Print this page.

Related Products

Unlock the possibilities of any ZonePRO system.

The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel. The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required. The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control. Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control. All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.

Features

  • 12 inputs/6 outputs
  • 6 balanced mic/line inputs
  • 4 unbalanced, mono-summed RCA input pairs
  • Mic gain per channel
  • AutoWarmth per output zone

Specifications

  • Front Panel LED Indicators:
    • Per Output: 6 independent six-segment light pipe output meters that range from -30 to +20 dBu, threshold meters
    • Other: LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
  • Analog Inputs: 12 Total - (6) balanced mic/lineinputs, (4) unbalanced,mono-summed RCA input pairs, S/PDIF input
    • Type: Euroblock (mic/line), RCA(source)
    • Impedance (Euroblock): > 50 kOhm balanced, > 25 kOhm unbalanced, RF Filtered
    • Impedance (RCA): > 25 kOhm unbalanced, RF Filtered
    • Max. Input Line Level: +20dBu mic/line, +12dBu RCA
    • CMRR: > 40dB, typically > 55dB @ 1 kHz
    • Mic Pre Gain: 30 to 60dB
    • Mic Input Noise (E.I.N.): < -118dBu, 22 Hz - 22 kHz, 150 Ohm source impedance
    • Mic Phantom Power: +15VDC
  • Analog Outputs: 6 total
    • Type: Electronically balanced, RF filtered Euroblock
    • Impedance: 120 Ohm balanced, 60 Ohm unbalanced
    • Max. Output Level: +20dBu
  • A/D Performance:
    • Type: dbx Type IV Conversion System
    • Dynamic RangeLine: > 113dB, A-weighted, > 110dB unweighted
    • Type IV Dynamic Range: > 119dB, A-weighted, 22 kHz; BW: >117dB, unweighted, 22 kHz BW
    • Sample Rate: 48 kHz
  • D/A Performance:
    • Dynamic Range: 112dB A-weighted, 109dB unweighted, 22 kHzBW
  • System Performance:
    • Dynamic Range: > 110dB A-weighted, > 107dB unweighted, 22 kHz BW
    • THD+N: 0.003% typical at +4dBu, 1 kHz, 0dB gain
    • Frequency Response: 20 Hz - 20 kHz, +/-0.5dB
    • Interchannel Crosstalk: > 80dB typical
    • Crosstalk input to output: > 80dB
    • Propagation Delay: 0.8 msec
  • Power Requirements:
    • Operating Voltage: 100-240 VAC, 50/60Hz
    • PowerConsumption: 27 watts
    • BTU: < 92.13
  • Dimensions: 1.75" (1U) x 19" x 7.75"
  • Weight: 6.2 lbs; 8.35 lbs shipping
  • Safety Agency Contributions: UL 60065, IEC 60065, E 60065, EN 55013

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information