Product Overview
The CMIT 5U is a 48V shotgun microphone. The capsule and amplifier of the CMIT 5U are built as a single unit. Pairs of LEDs next to each pushbutton indicate the status of the filters. Even in darkness the user can read the settings and see that the microphone is operational. The settings are retained when the microphone is switched off.
Includes
- Schoeps CMIT 5 U Shotgun Microphone
- W 140 Windscreen
- SG 20 Microphone Stand Clamp
- Rycote WS 4 Modular Windshield Kit
- Rycote Connbox CB1
Features:
- Schoeps CMIT 5 U Shotgun Microphone
- Unusually low coloration of off-axis sound
- Suitable for music recording as well as dialogue
- Rotationally symmetrical polar pattern
- Even greater immunity to wind noise than a SCHOEPS supercardoid
- Very lightweight, robust all-metal housing
- W 140 Windscreen for mild wind and careful boom movements
- SG 20 Microphone Stand Clamp
- For a microphone of 20 or 21 mm diameter (e.g. CMC, CMIT)
- Stable metal housing
- Robust and non-scratching plastic clamp
- Rycote WS 4 Modular Windshield Kit
- Lightweight, durable windshield baskets are robust enough to withstand the rigors of Broadcast and ENG
- Modular design means our windshields can fit a variety of length microphones
- Designed to be used with Rycote Modular Suspensions to provide excellent wind and handling noise reduction
- Rycote Connbox CB1
- Isolates and minimizes handling and cable-borne noise
- Greatly improves audio quality of recordings
- A ready-to-use solution to connection problems
Specifications
- Schoeps CMIT 5 U Shotgun Microphone
- Pickup pattern: Supercardioid / lobe-shaped
- Frequency range: 40 Hz - 20 kHz
- Sensitivity: -35 dB (V/Pa), 18 mV/Pa
- Equivalent noise level (A-weighted): 13 dB
- Equivalent noise level (CCIR): 24 dB
- Signal-to-noise ratio (A-weighted): 81 dB
- Maximum sound pressure level (THD < 0.5 %): 131 dB-SPL (P48)
- Maximum output voltage: 1.3 V (2.5 dBV) with 1 kΩ load
- High shelf filter: switchable, +5 dB at 10 kHz
- Low cut filter: switchable, 80 Hz, 18 dB/oct.
- Proximity filter: switchable, 300 Hz, 6 dB/oct.
- Minimum recommended load impedance: 1 kΩ
- Output impedance: 50 Ω
- Maximum cable length: > 400 m
- SCHOEPS RFI Shield: Yes
- Powering standard / Valid range: P48 / >34 V
- Current consumption: 4.4 mA (P48)
- Common mode rejection ratio (at 1 kHz): > 65 dB
- Output: XLR-3M, analog, 1 channel
- Dimensions (L x Dia.): 251 mm x 21 mm (9.9 x 0.8 in.)
- Weight: 95 g
- Surface finish: blue
- Rycote WS 4 Modular Windshield Kit
- Fits microphones from 246 to 280 mm (9.7 to 11.3 in.) in length
- Windshield Height: 100mm (3.9 in.)
- Windshield Body Length: 330mm (13 in.)
- Total Windshield Length (inc end caps): 440mm (17.3 in.)
- Maximum wind-noise attenuation: 30dB
- Rycote Connbox CB1
- INPUT
- Input connector: XLR -3F
- Input Connbox Connector: Hardwired
- Input Cable outside diameter: 2.5mm
- Input Cable Exposed Length: 130mm
- Input Cable Band Colour: Plain
- OUTPUT
- Output Connector: XLR – 3M
- Output Connbox Connector: Hardwired
- Output Cable Outside Diameter: 4.8mm
- Output Cable Exposed Length: 450mm
- Output Cable Band Colour: Plain