Quam SYSTEM-5/70RS 12"x24" Tile Replacement Loudspeaker System, 70V Transformer with Rotary Switch

The Quam SYSTEM 5 is a complete loudspeaker assembly, with 8" frame, perforated steel baffle and integral back box. It is intended for indoor and sheltered outdoor applications. One 24" white "T" bar is supplied to finish the edge. The SYSTEM 5 / 70RS is a complete, UL Listed, shallow depth, lightweight, 1' x 2' ceiling tile replacement loudspeaker system consisting of an 8C5PAX - 8" O.D. dual cone loudspeaker with a 5oz. magnet and a 4W-70V rotary select transformer. Molded fiber enclosure is 617 CID. Steel baffle with standard perforation and four (4) seismic tie-off points. Cable clamp and one (1) 24" "T" rail for finishing the edge are included. No assembly required.

Quam SYSTEM-5/70RS Applications:

Program Material – Signal tones, voice, and music

UL LISTED 1480 – As a General Signaling Device - When installed with supplied installation instructions and requirements of NEC / AHJ. (UEAY, UEAY7 - Canada)

UL LISTED 2043 – Suitable for use in air-handling spaces

City of Chicago Approved – Material and construction permits use where ceiling plenum is part of the air handling system.

Installation – Mounted parallel to door plane in a 24” wide suspended ceiling tile grid.

Quam SYSTEM-5/70RS Includes:

• .Loudspeaker – 8C5PAX
• Transformer – 4W-25V : 5 Tap, Rotary Select (4W, 2W, 1W, 0.50W, 0.25W)

Specifications:

• Loudspeaker: 70.7V / 4W Rotary select
• Speaker Size: 8" frame
• Calculated Output: 103dB SPL, 5W / 1M
• Average Sensitivity – 92dB SPL, 1W / 1M
• Loudspeaker Power Rating – 12W RMS EIA 426A Standard
• Maximum Output – 15W @ 8Ω
• Magnet Type & Weight – BeFe Ceramic, 5oz. Nominal
• Frequency Response – 65Hz - 17kHz EIA 426A Standard
• Nominal Coverage Angle – 100° Included Angle -6dB / 2kHz, Half space
• Audio Connection – 7” Leads
• Unit Weight – 4.05lbs