Blue BOTTLE-ROCKET-STAGE1 Bottle Rocket Stage 1 Large Diaphragm Condenser Class A Discrete Solid State Microphone with B8 Cardioid Capsule

Blue Microphones' Bottle Rocket Stage One is their most accessible Class A discrete solid state mic with a foundation for interchangeable capsules, including Blue's nine vintage lollipop-style capsules, the Bottle Caps. Theis bayonet-mounted system gives the user unlimited flexibility and a wide variety of tonal characteristics and pickup patterns, all in one mic.

Precision-designed and hand-assembled, the Stage One is crafted for a lifetime of use. Compared to similar microphones, the Stage One had a very low self noise specification (<7.5dB) and a very high output level (+12dBV), making it the perfect choice for today's high sample rate/deep word length digital platforms. Instead of integrated circuits (chips), the Stage One employs a transformerless Class A discrete amplifier circuit to ensure the most accurate and noise-free signal possible, with minimal distortion and coloration. The Stage One is an ideal microphone for recording virtually any sound source. In addition to the microphone, the Stage One also includes Blue's custom spider shock mount.

Both Stages of the Bottle Rocket family can take advantage of the Bottle Caps, Blue's family of nine interchangeable capsules with different tonal characteristics and pickup patterns. Each Bottle Cap is designed to provide the recordist with the ultimate sonic solution for their respective application. Below is a complete list of the nine Bottle Caps. Get them all and you'll have an entire mic cabinet at your fingertips.

• B0 - Airy top end, silky vocal sound
• B1 - Ultimate for acoustic instruments
• B2 - Vintage rich ribbon sound with muted top end & detailed midrange
• B3 - Accurage, neutral sound
• B4 - Live & orchestral applications
• B5 - Dramatic top & bottom
• B6 - The renowned Blue sonic signature - smooth, liquid presence
• B7 - Today's vintage sound
• B8 - All-purpose - Blue's "TPO" (The Popular Opinion) sound

Blue Microphones Bottle Rocket Stage 1 Specifications:

• Transducer Type: Pressure gradient or pure pressure (depending on capsule)
• Polar Pattern: Cardioid, Omnidirection, Figure of 8 (depending on capsule)
• Frequency Response: 20Hz-20kHz
• Sensitivity: 27mV/Pa (+/-10mV depending on capsule) at 1kHz (1Pa=94dB SPL)
• Output Impedance: 50 ohms
• Rated Load Impedance: Not less than 1k ohm
• Noise Level A-Weighted: Not more than 7.5 dBV - 14 dBV (IEC 651) (depending on capsule)
• Maximum Output: +12dBV = 3.1 Vrms (2.5kohms, 1% THD)
• Maximum SPL: 138 dB SPL (2.5kohms, 1% THD)
• Dynamic Range: 130dB (@ 2.5kohms)
• Power Requirements: +48V DC phantom power (IEC 268-15) (+35V min)
• Current Draw: 1.8mA (typical AI +48V)