RDL STCX2S

ST-CX2S

OUR PART #:  STCX2S Write the First Review.

Our Price: $129.66
List Price: $173.43
You save 25%!
  • Active Subwoofer Equalization
  • Subwoofer Signal from Stereo Source
  • Adjustable Low-Frequency Boost
  • Low-Noise and Low-Distortion Crossover
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' ST-CX2S is a subwoofer signal equalizer in the STICK-ON series of products from RDL. It offers flexibility in equalization adjustment, with the exceptional performance of RDL. The ST-CX2S features two separate, isolated balanced bridging inputs which may each be wired balanced or unbalanced. The output driver is 150 O balanced which can drive low or high impedance balanced or unbalanced lines. The module operates at unity gain at 63 Hz (balanced input to balanced output). A BOOST control permits adjustment of the output at 32 Hz from flat to +5.5 dB. It features RDL’s SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.

Features:

  • Active Subwoofer Equalization
  • Subwoofer Signal from Stereo Source
  • Adjustable Low-Frequency Boost
  • Low-Noise and Low-Distortion Crossover
  • Active Crossover Component
  • RDL® SupplyFlex™ Power Input Configuration

Specifications:

  • Inputs (2): 50 kO balanced line-level (+4 dBu)
  • Output: 150 O balanced line-level (+4 dBu)
  • Output Bandwidth: 22 Hz to 80 Hz, (adjustable BOOST)
  • High Frequency Attenuation: > 45 dB (at 400 Hz)
  • Gain: Unity at 63 Hz; adjustable flat to +5.5 dB at 32 Hz
  • Headroom: 18 dB minimum at 30 Hz (maximum boost), 22 dB typical
  • THD+N: < 0.05%
  • Input CMRR: > 60 dB (30 Hz or above)
  • Residual Noise: < 90 dB (referred to +4 dBu); 95 dB typical
  • Power Requirement: GROUND-REFERENCED or FLOATING, 24 to 33 Vdc @ 30mA

Note

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL STR19A STR-19A

RDL STR19A STR-19A

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
$141.35 List Price: $189.08You Save 25%
In Stock
Free Shipping AvailableFree Shipping
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
$24.18 List Price: $32.35You Save 25%
In Stock
RDL DRA-35S  Din Rail Adaptor for STICK-ON

RDL DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
$20.06 List Price: $23.67You Save 15%
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
RDL STRRB1 ST-RRB1

RDL STRRB1 ST-RRB1

Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
$23.44 List Price: $27.65You Save 15%
In Stock
RDL STR19B STR-19B

RDL STR19B STR-19B

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
$168.05 List Price: $224.79You Save 25%
Please call for availability.
Free Shipping AvailableFree Shipping
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 6-10 business days.
RDL SR10 SR-10

RDL SR10 SR-10

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
$67.63 List Price: $90.45You Save 25%
Usually ships in 4 business days.
RDL SR12A SR-12A

RDL SR12A SR-12A

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
$67.63 List Price: $90.45You Save 25%
Usually ships in 6-10 business days.
RDL STPBR4 ST-PBR4

RDL STPBR4 ST-PBR4

Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
$35.78 List Price: $47.84You Save 25%
Usually ships in 6-10 business days.
RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

RDL DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
$33.98 List Price: $40.10You Save 15%
Usually ships in 6-10 business days.
RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

RDL SMK12 Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
$28.96 List Price: $38.73You Save 25%
Usually ships in 6-10 business days.
RDL DTB-RDL Dtb Rdl Detachable Terminal Block

RDL DTB-RDL Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
$7.15 List Price: $8.44You Save 15%
Usually ships in 4 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information