Radio Design Labs STCX2

ST-CX2

OUR PART #: STCX2 Write the First Review.

Our Price: $129.66
List Price: $173.43
You save 25%!
  • Active Low-Frequency Woofer Equalization
  • Active Full-Range Equalization
  • Adjustable Equalization
  • Crossover with Loop-through Output
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 7-14 business days.

Related Products

Radio Design Labs' ST-CX2 is a line-level two band crossover to drive audio power amplifiers. The input and outputs are balanced and may be connected unbalanced if necessary. The input accepts a +4 dBu line-level signal. The module operates at nominal unity gain.

The FULL RANGE output is designed for use with full-range speaker systems which do not contain a woofer (below 100 Hz). The passband is 100 Hz to 30 kHz, with an equalization adjustment centered at 2 kHz. Through the application of a smile-curve providing up to 8 dB attenuation through midband audio frequencies, the performance of the whole system may be significantly enhanced.

The WOOFER output is designed for use with woofers amplified independently of any full-range speakers. The passband is 40 Hz to 165 Hz when set flat, with an equalization BOOST adjustment centered at 50 Hz.

For systems also incorporating subwoofers, the LOOP THRU output connects to an input of the RDL ST-CX2S Subwoofer Crossover. The ST-CX2 features RDL’s SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.

Features:

  • Active Low-Frequency Woofer Equalization
  • Active Full-Range Equalization
  • Adjustable Equalization
  • Crossover with Loop-through Output
  • Low-Noise and Low-Distortion Crossover
  • RDL® SupplyFlex™ Power Input Configuration

Note:

Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

Radio Design Labs STR19A STR-19A

Radio Design Labs STR19A STR-19A

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
$141.35 List Price: $189.08You Save 25%
In Stock
Free Shipping AvailableFree Shipping
Radio Design Labs PS24AS PS-24AS

Radio Design Labs PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
$24.18 List Price: $32.35You Save 25%
In Stock
Radio Design Labs STRRB1 ST-RRB1

Radio Design Labs STRRB1 ST-RRB1

Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
$23.44 List Price: $27.65You Save 15%
In Stock
Free Shipping AvailableFree Shipping
Radio Design Labs DRA-35S  Din Rail Adaptor for STICK-ON

Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
$20.06 List Price: $23.67You Save 15%
In Stock
Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
Radio Design Labs STR19B STR-19B

Radio Design Labs STR19B STR-19B

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
$168.05 List Price: $224.79You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs SR4 SR-4

Radio Design Labs SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs SR12A SR-12A

Radio Design Labs SR12A SR-12A

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
$67.63 List Price: $90.45You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs SR10 SR-10

Radio Design Labs SR10 SR-10

Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
$67.63 List Price: $90.45You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs STPBR4 ST-PBR4

Radio Design Labs STPBR4 ST-PBR4

Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
$35.78 List Price: $47.84You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

Radio Design Labs DRA-35S-6 6 Stick-On DIN Rail Adapter Modules

Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
$33.98 List Price: $40.10You Save 15%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs SMK12 Smk 12 Mounting Strip for STICK-ON Units

Radio Design Labs SMK12 Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
$28.96 List Price: $38.73You Save 25%
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
Radio Design Labs DTB-RDL Dtb Rdl Detachable Terminal Block

Radio Design Labs DTB-RDL Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
$7.15 List Price: $8.44You Save 15%
Usually ships in 7-14 business days.

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information