Rane MLM82S

Stereo Mic/Line Mixer

OUR PART #: MLM82S Write the First Review.

  • Four balanced Mic/Line Inputs (XLR):
  • 15V Phantom Power
  • Bi-Color Signal Present/Overload indicators
  • Trimless Mic Stage Preamplifiers
Learn More
Our Price: $399.00
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
In Stock

Related Products

The Rane MLM 82S features four balanced, studio grade, Mono Mic/Line Inputs with XLR jacks and 15 VDC phantom power. Each of the four Mic/Line inputs may be assigned to A, A+B or B outputs. Independent Level/Gain Trim controls and Signal/Overload indicators are provided for each Mic/Line input. The Phantom Power switch and the Mic/Line switches are located on the rear panel. Phantom power is removed from any input set for Line operation.

The MLM 82S also features four stereo line level inputs with 12 dB of line gain. Each Stereo Line Input features a recessed Mono switch with indicator and Level control. These inputs may also be used with four mono A inputs and four mono B inputs.

A and B Output Level controls set the master mix level independently for A and B outputs. The mix amplifiers feature independent overload indicators. To correct any overload condition, the entire mix can be reduced and/or individual input levels adjusted. A and B mix Outputs each have an internal switch for padding the output signal to MIC level. The factory default is Line level.

The MLM 82S replaced the MLM 82a with a new internal universal power supply (100-240 VAC).

Rane MLM 82S Features:

  • Four balanced Mic/Line Inputs (XLR):
    • 15V Phantom Power
    • Bi-Color Signal Present/Overload indicators
    • Trimless Mic Stage Preamplifiers
    • A / A+B / B Assign Switch
  • Four Balanced Stereo Line Inputs (TRS):
    • Independent Mono switch
    • 12 dB of Line Gain
  • Two balanced Outputs (XLR):
    • Operate in Stereo, or as a 2 Separate Zone Mixer
    • Independent Overload indicators
    • Independent Level controls
    • Internal Pad for Mic level output

Rane MLM 82S Specifications:

  • Inputs: Active Balanced
  • Mic Jacks: XLR | pin 2 = (+)
  • Stereo Line Jacks: 1/4" TRS | tip= (+),ring=(–),sleeve=GND
  • Input Impedance: 1k/96kOhms | Limit 1%: Balanced 500+500 / 48k + 48k
  • Mic Gain Range: off to +60 dB: +/- 1.5
  • Line Gain Range: off to +20 dB: +/- 1.5
  • Equivalent Input Noise: -128 dBu | 20 kHz bandwidth,150 Ohm termination
  • THD & Noise: 0.02% | Gain=40 dB, +4 dBu @ 1 kHz,80 Hz BW
  • Frequency Response: 30 Hz - 35 kHz | -3 dB
  • Maximum Input: 11.9 dBu | Minimum Gain (3 Vrms)
  • @ Mic Level: 38.6 dBu | Maximum Gain (9.1 mVrms)
  • Stereo Line Input Impedance: 20kOhms
  • Gain Range: off to +12 dB | +/-1
  • S/N Ratio: 90 dB | Unity gain, output @ +4 dBu, 22kHz BW
  • Frequency Response: 10 Hz - 35 kHz | -3 dB
  • HD & Noise: 0.007% max | +4 dBu at 1 kHz, 80 kHzBW
  • Outputs: Type XLR ActiveBalanced
  • Impedance: 200/100 Ohms | Line level Out/Mic levelOut
  • Gain Range: Off to +6 dB | +/- 2
  • Drive Level: +24 dBu | 600 Ohms load balanced
  • Phantom Power: +15 VDC | 4%
  • Output Cable Length 1500 feet typ Line-level, < 50 pF per foot
  • Crosstalk -75 dB @ 1 kHz max re +4dBu any channel to any channel
  • Unit: Agency Listing UL/cUL/CE
  • Power Requirement 100 to 240 VAC 10% 50/60 Hz, 7W
  • Unit: Construction All Steel
  • Size (1U) (HxWxD): 1.75" x 19" x 5.3" (4.4 cm x 48.3cm x 13.3 cm)
  • Weight: 4 lb

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information