Tripp Lite SU3000RTXR3U SmartOnline Double Conversion UPS, Extended Run, 3 Rack Units

3000VA high power density on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Special "XR" version offers larger internal batteries than standard "XL" model. 3U rackmount form factor with an installed depth of 26 inches. Expandable battery runtime with optional BP72V15-2U and BP72V28RT-3U external battery packs. Full time sine wave 110 or 120V +/-2% output. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 138V. NEMA L5-30P input plug. NEMA 5-15, NEMA 5-15/20R and NEMA L5-30R output receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and mains power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated two bank PDU switching supports load shedding and remote-reboot of connected equipment. 3 stage metered current monitoring and battery charge status LEDs. LED display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network ethernet connection. Mains power and voltage regulation LEDs. Fault-tolerant auto-bypass mode. 4 post rackmount accessories. 2-9USTAND tower kit and 2POSTRMKITWM two post rackmount hardware accessories available. Field replaceable, hot swappable internal batteries and external battery packs.

Features:

• Special "XR" version offers larger internal batteries for longer runtimes than standard "XL" model
• True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions
• Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
• Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types
• Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values
• Standard internal battery set offers 33 minutes runtime at half load (1200W) and 14 minutes at full load (2400W)
• Optional BP72V15-2U external battery pack increases runtime to 60 minutes at half load (1200W) and 30 minutes at full load (2400W /limit 1)
• Optional BP72V28RT-3U external battery pack increases runtime to 94 minutes at half load (1200W) and 41 minutes at full load (2400W / multi-pack compatible)
• Compact rackmount form factor installs using only 3 rack spaces (3U) with a maximum installed depth of 26 inches
• Ships with all mounting accessories for 4 post rackmount installation
• Optional 2POSTRMKITWM enables 2 post rackmount installation
• Optional 2-9USTAND accessory enables small-footprint upright tower placement
• Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance
• Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and SNMPWEBCARD slot
• HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
• Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
• UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints
• Built-in Emergency Power Off (EPO) interface with cable
• NEMA L5-30P input plug / NEMA 5-15/20R & NEMA L5-20R output receptacles
• Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has four outlets)
• Front panel LEDs offer current monitoring and battery charge level information
• UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
• Single line TEL/DSL or network ethernet line surge suppression

Specifications:

• See Product Description PDF