ETC 436HID-150 150W 36° Black Source Four HID

Source Four lighting power for architecture. If your architectural space needs the lighting punch and long throws of a threatrical spotlight, or the even, clean wash of a PAR-style fixture, the solution is ETC's Source Four HD.

With the potent light of a Source Four HID you can draw attention to your interior design and architectural details, call out specific objects and dramatize display spaces, or project interest-grabbing patterns, logos and signage. Source Four HID's long-life 12,000-hour lamp means low maintenance and less lamp change-out, and that's perfect for positions that can't be reached often or easily - like tall museum ceilings or vaulted church areas.

Source Four HID gives you the level of performance of a 2,000-hour Source Four fixture but with 10,000 additional hours. The metal-halide fixture features all of the Source Four's famous cool beam, imaging, pattern projection, and bright, even field. Source Four HID uses an electronic ballast with a power factor of greater than 95% compared to some competitor's ballasts at less than 70%. And HID's ballast has an efficiency of greater than 90%. With its 1.5 amps operating current, you can safely place more Source Four HIDs on a 20A circuit than you can other manufacturers' units that operate at 2.3 amps. Plus, Source Four HIDs are UL Listed for damp locations.

Source Four HID variety: from spotlight to zoom to wash - there is a Source Four HID for every architectural environement. The standard Source Four HID now adds 14º, 70º and 90º field angles to its range for even more throw-distance options. Use the Source Four HID jr when space is tight. The Source Four HID Zoom allows you to change field angles for multipurpose venues. The Source Four HID PAR gives you brilliant wash lighting, and the Source Four HID PARNel gives you multiple effects - dramatic pools of light or room-filling washes. The Source Four HID PAR and HID PARNel offer four field spreads and a 25º-45º zoom range.

Source Four HIDs are non-dimmable fixtures.

ETC 436HID-150 Features:

• Yoke mounting electronic ballast
• Rugged, die cast aluminum construction
• Rotating shutter assembly
• 20 guage stainless steel shutters in a tri-plane assembly
• Interchangable lens tubes with smooth-running teflon guides provide nineuser selectable field angle options
• Termally insulated rear handle
• High impact, thermally insulated knobs and shutter handles
• Two accessory slots and a top mounted, gel frame retainer
• Steel yoke with two mounting positions
• Positive locking single-clutch fixture body
• Slot for glass or stainless patterns
• Wide accessory slot with sliding cover for motorized pattern devices or optional iris

ETC 436HID-150 Specifications:

• Electrical Specifications
  • 150W electronic ballast (yoke mounted)
  • Lesse than 14 Amps in rush current, lasts less than one AC cycle (16.7mS)
  • Less than 10% Harmonic distortion
  • Greater than 95% Power Factor
  • 90% Ballast Efficiency
  • 120V Ballast: 120V±
  • 277V Ballast: 227V±
• Optical Specifications:
  • Re-optimized optical system for improved photometric performance and field uniformity
  • Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light
  • Reflector secured with anti-vibration shock mounts
  • Projector-quality, high contrast aspheric lens
  • Len(es) secured with anti-vibration shock mounts
  • Pre-focus lamp cap, unaffected by relamping
  • Beam edge continually adjustable hard-to-soft
  • Interchangeable lens barrels permit selection of 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, 90° field angles as well as 19°,26°, 36°, and 50° EDLT lenses.
• Lamp Specifications:
  • 150W Ceramic metal halide
  • Shipped with 150W Philips MasterColor CDM lamp
  • 3000°K color temperature; 12,000 hrs of lamp life; Color Rendering Index 85