RTS LMS325

LMS-325

OUR PART #:  LMS325 Write the First Review.

Our Price: $620.00
  • Dual channel inputs from RTS® TW Intercom or 2 separate program inputs.
  • Full Range 5 Watt Speaker and Power Amplifier
  • Standard 1/2 rack width 1 RU configuration compatible with MCE-325, MRT-327, LMS-325.
  • Magnetically shielded enclosure allows for use adjacent to video monitors without picture degredation.
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 2 business days.
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

The RTS® Model LMS-325 Line Monitor Speaker Station is a modular amplified speaker that can be used to monitor one or two intercom or program channels. It features 5 watts of drive power and includes a wide range 8 ohm speaker. The LMS-325 is in the standard 1 RU, ½ rack width form factor of other RTS® intercom products, including the RM-325 Intercom station, the MRT-327, MCE-325, SSA-324 and others. A large variety of mounting options and hardware are available to suit any application.

The LMS-325 has separate phono jacks for each program input and an XLR-3 connector for a two channel RTS® intercom line. A rear panel adjustment allows the user to set relative levels between the two input channels. The LMS-325 is magnetically shielded to allow it to be placed adjacent to video monitors without affecting their display alignment. The unit is powered locally from a supplied power pack to allow operation with dry audio signals and to prevent loading of the RTS® TW intercom channels.

Features:

  • Dual channel inputs from RTS® TW Intercom or 2 separate program inputs.
  • Full Range 5 Watt Speaker and Power Amplifier
  • Standard 1/2 rack width 1 RU configuration compatible with MCE-325, MRT-327, LMS-325.
  • Magnetically shielded enclosure allows for use adjacent to video monitors without picture degredation.
  • Locally powered to allow use with any audio or intercom source.

Specifications:

  • Impedance: 8 ohms
  • Power Rating: 5 watts
  • Sensitivity: 90± 2dB/2.83V/meter on axis averaged over one octave bands centered at 250 Hz, 500 Hz, 1kHz, 2 kHz, 4 kHz and 8 kHz when enclosed in a sealed box with a volume of 1.3 liters.
  • Frequency Response: 200 Hz to 10 kHz± 4 dB on 1/10 octave measurements in a sealed box with a volume of 1.3 liters.
  • Free Air Resonance: 200 Hz to 250 Hz
  • Stray Magnetic Field: Less than 1 gauss at a distance of 1 cm from chassis
  • Mechanical Noise: Free of buzzes and rattles with 5W sine wave input from 100 Hz to 22 kHz.
  • Environmental Requirements:
    • Storage: -20ºC to 80ºC; 0% to 95% humidity, non-condensing
    • Operating: 0ºC to 50ºC; 0% to 95% humidity, non-condensing.
  • Dimensions: 1.72" (44mm) high, 8.2" (208mm) wide, 8" (203mm) deep
  • Weight: 2 lbs, 12 oz (1.25kg)
  • Connector Pin Configurations:
    • Speaker Inputs:
      • Type: RCA Phono Jacks
      • Tip: Audio
      • Sleeve: Common
      • Type: XLR-3F
      • Pin 1: Common
      • Pin 2: RTS® Channel 1 audio
      • Pin 3: RTS® Channel 2 audio
    • External Power:
    • Type: 2.0 mm jack
    • Internal Pin: positive (+) 12-15 VDC
    • External Shell: negative (-)
    • Speaker Amplifier:
  • Note: Specifications are for Input 1 with the balance control set for minimum attenuation. Specifications for Input 2 are identical.
    • Input Impedance: 47kOhm
    • Input Level: 0.7 Vms
    • Output Amplifier Power: 5W maximum, 4W continuous into 8 ohms
    • Signal-to-Noise Ratio: 75 dB, reference 2W into 8 ohms
    • Total Harmonic Distortion: Less than 0.5% at 2W nominal
    • Balance Control: 12 dB maximum relative attenuation

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information