RTS WMS300L/A4F WMS-300L A4F

OUR PART #: WMS300L/A4F MFR #: F.01U.391.517

Copied to clipboard

RTS' WMS-300L Wall mount Speaker Station of a series of User Stations especially designed to work within the TW Intercom System. ...Read more

RTS WMS300L/A4F WMS-300L A4F Image 1
RTS WMS300L/A4F WMS-300L A4F
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

RTS' WMS-300L Wall mount Speaker Station of a series of User Stations especially designed to work within the TW Intercom System. It fits directly into a standard 4-gang electrical conduit box (2-1/4" deep). The rear section is not enclosed and sets the back-box to provide a housing when installed.

This user station is perfect for permanent installations where a wall mounted station can provide an unobtrusive operating position. Most often it is located where the operator can conveniently attend to on-going operations while wearing a headset or listening to the loudspeaker. Typically, the WMS-300L is a very practical user station since it can operate in an "open-listening" mode with the panel-mounted loudspeaker as well as privately with a headset or a handset.

In the open-listening operating mode, with both the loudspeaker and an external microphone turned on, acoustic feedback is suppressed by adjustment of a front panel sidetone (balance) control. This control cancels the originating microphone signal in the local loudspeaker. Most any type of microphone can be used, a hand held push-to-talk microphone, a headset/handset microphone, etc.

In the private operating mode, almost any headset or handset can be used while the loudspeaker is turned off. This method can be extended by using the loudspeaker for monitoring and the headset or handset for conversation.

Practical operating features include two-channel selection, latching and momentary-action microphone on-off switches, a speaker on-off switch, a sidetone control, and a headphone/loudspeaker volume control.

Screw terminals counted on the circuit card are provided for user station interconnection to line. A two pair shielded cable such as Belden 8723 or equivalent is recommended since it allows each channel to be carried over a shielded pair, thus reducing the possibility of crosstalk between channels.

Specifications:

  • Headset Connector:
    • Dynamic Microphone: XLR type 4 or 5-pin connector version available
  • Line Connector: Screw Terminals
  • Dimensions: 4.50" (114.30mm) high, 8" (44.5mm) wide, 1.75" (44.45mm) deep
  • Weight: 1 lbs (0.45 kg)
  • Finish: Light gray enamel paint
  • Power Consumption:
    • Quiescent: 10 to 40 mA
    • Operating: 25 ohm phones: 50mA
    • Operating: 25 ohm phones + call light: 70mA

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download