Bag End P-D18E-I 2x18" 1000W Active Loudspeaker

The P-D18E-I is a very high output self-powered subwoofer system designed to provide high fidelity extended low frequency audio reproduction from a relatively small enclosure. The P-D18E-I provides perfectly flat response down to 8 Hertz when used in conjunction with the 8 Hertz Integrator. Designed for permanent installation, the P-D18E-I offers a flat black textured finish and a black coated steel grille.

Specifications:

• Enclosure: 18 mm 13-ply birch plywood
• Low Frequency Transducers: 2 - 18" INFRA cone, 3" Voice coil, 12O oz. Magnet
• Internal Amplification: 1-Minima One
• Grille: 16 Gauge black vinyl coated perforated steel
• Standard Hardware: 8 - Machined aluminum speaker mounting clamps
• Optional Hardware: Rigging points
• System Type: 2-Infrasub sealed chambers (3 cu. ft.each)
• Input: 10K Ohms Balanced XLR input with loop through
• Input CAL Sensitivity: +4 dBu
• System Power: 1000 W. continuous
• Frequency Response: 60 Hz to 250 Hz +/-3 dB
• w/ external Infra Integrator: 8 Hz to 95 Hz +/-3 dB
• Hi Pass Filter Frequency Switchable: -6dB @ 8 Hz, @50 Hz, @ 95 Hz
• Crossover Network: Requires external INFRA Integrator for 8 Hz Response
• Maximum Acoustic Output: Half Space @ 1 Meter, 10 Hz- 97 dB SPL, 20 Hz - 109 dBSPL, 40 Hz - 121 dBSPL, 80 Hz - 130 dB SPL
• LED Indicators: On (Green), System Limit (Yellow), System Fault or Sleep Mode (Red)
• AC Power Requirements: 88 Volts Minimum, 270 Volts Maximum
• Finish: Black textured finsh
• Dimensions (H x W x D): 43" x 22" x 18" (110 x 56 x46 cm)
• Weight: 132 lbs. (60 kg)