DBX ZC-3 Zone Controller with Program and Source Selector for DriveRack

The ZC-3 provides programmable rotary switch program selection for the dbx DriveRack 220i and 260 devices. It also provides rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePro devices. It has DIP switches allowing identification with connection to the processing device via CAT5 cable on RJ-45 connectors.

The Zone Controllers from dbx offer extended utility to the DriveRack® and ZonePRO™ families. ZC-3 and the other Zone Controllers (sold separately) use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 feet, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

Features

• Functions as a program selector for the DriveRack 260 and 220i
• Can also function as a source selector, page steering control, or scene selector for ZonePRO products
• Up to 1000 ft. on CAT5 cable
• 2 RJ-45 connectors

Specifications

• Connectors: (2) RJ-45
• Series Wiring Maximum Cable Length varies with number of Zone Controllers. For Example, Three Zone Controllers: 600' / Six Zone Controllers: 300'
• Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000'
• Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ω/M (Ω/1000') nominal DCR and rated VW-1 or higher
• Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065