DBX ZONE-PRO-640

ZonePRO 640 6x4 Zone Router / Processor

OUR PART #:  ZONE-PRO-640

Write the First Review.
Our Price: $549.00
List Price: $687.00
You save 20%!

SPECIAL FINANCING AVAILABLE

Pro Buyer Card
$12/month for 48 months
0% Interest for 48 Months! ‡‡ Learn More
In Stock
  • Advanced Feedback Suppression (AFS)
  • Autowarmth
Print this page.

Related Products

With 6 inputs and 4 outputs the dbx ZonePRO® 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for commercial audio applications. Designed to offer superior sonic performance and flexibility, the 640 delivers the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 provides every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression, and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like dbx’s patent-pending AutoWarmth® function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO® every tool is at your disposal to maximize the response of your system.

Features

  • Advanced Feedback Suppression (AFS)
  • Autowarmth
  • Auto gain control
  • Compressor, limiter, noise gate, notch filter, parametric EQ
  • RS-232 Control

Specifications

  • Input: (6 total) (2) Switchable line or mic inputs (4) RCA Source
  • Input Connectors: Euroblock (Line and Mic) RCA (Source)
  • Input Type: Electronically balanced/RF-filtered
  • Input Impedance: 50k ohm balanced, >75k ohm unbalanced
  • Max Input: +20dBu Mic/Line, +12dBu RCA
  • CMRR: >40dB, typically >55dB @ 1 kHz
  • Mic Preamp gain: 30 to 60dB
  • Mic Preamp Equivalent Input Noise (EIN):
  • Mic Preamp Phantom Power: 15V
  • Output: 4 total
  • Output Connectors: Euroblock
  • Output Type: Electronically Balanced, RF Filtered
  • Output Impedance: 120 ohms balanced, 60ohm unbalanced
  • Max Output: +20dBu
  • A/D Converter: dbx Type IV™ conversion system
  • A/D Dynamic Range: (line) >113 dB, A-weighted, >110 dB unweighted
  • Type IV Dynamic Range: >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW
  • Digital Output: RCA 24-Bit oversampling
  • Digital Output Dynamic Range: >114 dB A-weighted, 110dB unweighted
  • Sample Rate: 48kHz
  • D/A Dynamic Range: 112 dB A-weighted, 109dB unweighted
  • Dynamic Range: >109 dB A-weighted, >106 dB unweighted
  • THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB gain
  • Frequency Response: 20Hz - 20kHz, +/-0.5dB
  • Interchannel Crosstalk: >80dB typical
  • Propagation Delay: 0.6 msec
  • Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz
  • Power Consumption: 29 W
  • Unit Weight: 6.8 lbs.(3.1 kg)
  • Shipping Weight: 8.8 lbs. (4.0 kg)
  • Dimensions (HxDxW): 1.75” x 5.75” x 19”
  • Safety Agency Certifications: UL 600065, IEC 60065, EN 55013, E60065

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

DBX ZC-FIRE Interface for Fire Safety System

DBX ZC-FIRE Interface for Fire Safety System

This remote device provides either output muting or programmable scene selection for the dbx ZonePro devices. Connection to the fire safety system is either through a relay or directly to the control voltage output. It has DIP switches ...
$64.00 List Price: $81.00You Save 21%
In Stock
Free Shipping AvailableFree Shipping
DBX ZC-8 Volume Control and Source Selector

DBX ZC-8 Volume Control and Source Selector

dbx's ZC-8 provides both programmable source selection and volume control to ZonePRO devices.The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to ...
$59.00 List Price: $74.00You Save 20%
In Stock
Free Shipping AvailableFree Shipping
DBX ZC-1 Zone Controller for Driverack

DBX ZC-1 Zone Controller for Driverack

The dbx ZC-1 provides programmable remote volume control for the DriveRack 220i, 260 and ZonePRO devices.The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC ...
$54.00 List Price: $68.00You Save 21%
In Stock
Free Shipping AvailableFree Shipping
DBX ZC-6 Volume Controller for Zone Pro

DBX ZC-6 Volume Controller for Zone Pro

This remote device provides computer programmable push-button up/down volume control for the dbx ZonePro devices. It has DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.
$54.00 List Price: $68.00You Save 21%
In Stock
DBX ZC-2 Zone Controller for Driverack

DBX ZC-2 Zone Controller for Driverack

The ZC-2 remote device provides computer programmable rotary potentiometer and push-button volume control and muting for the dbx DriveRack 260, 220i and ZonePro devices. The remote device has DIP switches allowing identification with ...
$54.00 List Price: $68.00You Save 21%
In Stock
DBX ZC-4 Zone Controller for Driverack

DBX ZC-4 Zone Controller for Driverack

This remote device provides programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. It also provides contact closure programmable source selection, page assignment, or scene selection for the dbx ...
$64.00 List Price: $81.00You Save 21%
Currently Out Of Stock Expected to SHIP out in 6-10 business days
DBX ZC-7 Push-to-Talk Page Assignment Controller for ZonePRO Products

DBX ZC-7 Push-to-Talk Page Assignment Controller for ZonePRO Products

The dbx ZC-7, part of dbx's ZC series of wall-mounted zone controllers, is a remote device that provides programmable push-to-talk page assignment for the dbx ZonePRO™ line of devices. It has DIP switches that allow ...
$59.00 List Price: $74.00You Save 20%
Currently Out Of Stock Expected to SHIP out in 4 business days

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information