Product Overview
Bogen's M-Class series is designed for reliability, flexibility, and power, and features three modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Additional features include Bogen's patented Back-Slope circuitry for regulating the proper amount of AC energy from the amplifier's power toroid, an energy-saving Sleep Mode, and support for up to two input modules with up to two priority settings with the ability to add other modules as needed.
Bogen M600 Features:
- 3 modes of operation to choose from - Stereo, Dual Mono, or 70V Mono
- Low noise, low distortion, and high slew rate
- Flexible modular input capability (2 module capacity)
- Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included
- 3 selectable low-frequency, roll-off choices
- 2x1 mixer function when in mono modes
- Insert connections for outboard equipment (in mono modes)
- Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)
- DC, overload, short circuit, and thermal protection circuits Clip limiting circuits for speaker protection
- Power-saving Sleep Mode for intermittent use applications
- Status, Signal, and Clip/Limit indicators
- Back-Slope AC voltage stabilization for dependable performance over varying AC line voltages
- Heavy-gauge steel chassis with cast aluminum front panel
- Recessed volume control knobs with snap-on protective cover
- Mounts in 2 rack spaces (3-1/2") directly stackable without need for extra space above or below
- 2 independent, continuously variable, cooling fans for dependable and quiet operation
- Easily removable front fan grilles with filters
- Stable into 2-ohm loads
Bogen M600 Specifications:
- Power Output:
- 70V Mono: 1200W @ 4 ohms
- 4-ohm: 600W per channel
- 8-ohm: 400W per channel
- Input Sensitivity: 1.161V for 600W @ 4 ohms
- S/N Ratio (20K BW): 109 dB ref. 8 ohms, F.P.
- Class of Operation: H
- Product Weight: 46 lbs
- Connectors:
- Power: 20A line cord
- Input: 2 new Bogen std. 12-pin connector modules/RCA input
- Output: 5-pin "touch-proof" Barrier Strip, RCAPre- & Post-EQ Output
- Power Bandwidth: 20-40kHz .5% THD
- THD @ 1 kHz rated power: less than .02%
- Load Impedance: 4-8 ohms, 70V
- Minimum Load Impedance (Stereo): 3.2 ohms
- Frequency Response @ 1 watt: 20-20kHz +/-0.25dB
- Output Regulation:
- 1kHz Direct: 0.5dB @ 8 ohms
- 1kHz Bridged: 1.5dB @70V
- Inputs (Plug-in modules): Electronically balanced, high-impedance module standard, other modular input types available
- AC Input Voltage Range: 95-130V AC, 60Hz
- Maximum AC Current: 20A
- Indicators: Status (On/Protect/Sleep), Clip/Limit, Signal
- Temperature Range: 15 to 105 degrees F
- Cooling: Forced Air Variable Speed Fan
- Dimensions (WxHxD): 17" x 3 1/2" x 16"
- Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Circuit-Breaker, Short Circuit
- Special Features: Sleep Mode, Back-Slode regulation, Stereo, Dual Mono,70V Mono Operation, Toroidal Power Transformer