Royer R-121 Studio Ribbon Microphone

Smooth, clear with many of the attributes of condenser microphones but with the ability to reproduce a wider dynamic range without pads and clipping. The frequency response is very flat from 30-15,000Hz and the panoramic sound-field is well balanced. The figure-8 bi-directional pattern offers excellent rejection at the sides, the ribbon is lengthwise providing a side-address type microphone. Great for any instrument or vocals. Includes a protective wooden case, mic sock and stand clip.

The R-121 is the world's first radically redesigned ribbon microphone and Royer's flagship product. Like most ribbons, the R-121's pattern is figure 8, its sensitivity is roughly equal to a good dynamic mic, and it exhibits a warm, realistic tone and flat frequency response (see R-121 Frequency Response). But when it became time to design, we threw out the molds and took a fresh approach to ribbons using advanced materials and cutting edge construction techniques. Today the R-121 completely redefines ribbon microphones, leading Recording Magazine to say "the Royer R-121 is destined to become one of the classic microphones of the 21st century". It's a sleek, light, extremely versatile microphone that is easy to use, wonderfully musical, and sturdy enough for us to give it a lifetime warranty!

An R-121 hears things the way your ears hear them. Many microphones are effects in a way; some add top end sizzle (like many condenser mics), some push the mids and roll off everything else, some respond to nothing but low end. They all serve a purpose and have their place in recording and live work. But if you've ever heard that incredible guitar, melodic trumpet, sweet flute, deep kick drum, (pick your sound), and found that getting that sound to tape or hard drive was impossible, you owe it to yourself to try a Royer ribbon. On playback you'll notice that the recorded sound is natural and alive, with a panoramic, ambient feel much like what you heard when you were standing in front of the instruments you recorded.

An R-121's response is flat and well balanced; low end is deep and full without getting boomy, mids are well defined and realistic, and the high end response is sweet and natural sounding, never edgy or sibilant.

Need to record at insane levels? No problem! The R-121's maximum SPL rating is >135dB and it can take that all day long. In practical terms, that means you can put your R-121 directly in front of a souped up mega-watts Marshall and turn it up to 11 without microphone distortion or doing any damage to the ribbon. We don't recommend trying this with other ribbon mics, but the R-121 can take it, no sweat.

At distances of two feet and closer, the back of the R-121 is brighter than the front side. The difference in the sound is somewhat like blending 10% of a condenser mic in with your ribbon mic signal. This can be extremely useful when you record acoustic guitars, vocals, and other sound sources that you may want to hear a little more top end on.

Warranty: Lifetime to original owner (repair or replace at Royer's option)

Applications

• Electric Guitar Amps
• Brass Instruments
• Horn Sections
• Drum Rooms
• Kick Drum
• Woodwinds
• Percussion Instruments
• Acoustic Piano
• Acoustic Guitar
• String Instruments & Sections
• Choirs & Orchestras
• Commercial Broadcast

Features

• High SPL Capabilities
• No internal active electronics to overload or produce distortion up to maximum SPL rating
• Extremely low residual noise
• Ribbon element is not affected by heat or humidity
• Absence of high frequency phase distortion
• Equal sensitivity from front or back of element
• Consistent frequency response regardless of distance

Specifications

• Acoustic Operating Principle: Electrodynamic pressure gradient
• Polar Pattern: Figure-8
• Generating Element: 2.5-micron aluminum ribbon
• Magnets: Rare Earth Neodymium
• Frequency Response: 30 -15,000 Hz +/- 3dB
• Sensitivity: -47 dBv Re. 1v/pa
• Output Impedance: 300 Ohms @ 1K (nominal)
• Rated Load Impedance: >1500 Ohms @ 300 Ohms
• Maximum SPL: >135dB @ 20 Hz
• Output Connector: Male XLR 3 pin (Pin 2 Hot)
• Dimensions (L x W): 155.7 x 25 mm (6.13 x 1 in.)
• Weight: 244g (8.6 oz)
• Finish: Dull Satin Nickel