Product Overview
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.
Features
- Condenser cartridge for studio quality sound
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal monitors
- Built-in three-point shock mount minimizes handling noise
- Two-stage pop filter reduces wind and breath noise
Specifications
- Type: Condenser
- Frequency Response: 50 to 18,000 Hz
- Polar Pattern: Cardioid
- Sensitivity (at 1,000 Hz): Open circuit voltage, -50 dBV/Pa (3.15 mV), (1 Pa = 94 dB SPL)
- Impedance: 150 Ω at 1 kHz, Recommended minimum load impedance 600 Ω
- Output Clipping Level: 1000 Ω load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL (at 1,000 Hz): 1000 Ω load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range (1000 Ω): 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
- Power Requirements: 11 to 52 Vdc, 5.2 mA
- Case: Dark gray, enamel-painted, die-cast with a stainless steel grille
- Connector: Three-pin professional audio connector (male XLR type)
- Weight: 284 g
- Dimensions (L x W): 183 mm x 49 mm