SurgeX SX1120RT 8-Outlet Rackmount Surge Suppressor / Power Conditioner

The SX1120-RT provides guaranteed surge protection and power conditioning for audio, video and computer equipment. The units are 20-amp load-capable and have 8 standard grounded AC receptacles (6 switched, 2 always on) plus a front-panel courtesy outlet.

SurgeX Advanced Series Mode surge suppression technology is superior to conventional MOV circuitry and MOV-hybrid designs. It has zero let-through voltage, provides reliable protection, and stops multiple surges of up to 6,000 volts and unlimited surge current without producing ground contamination or common-mode disturbances.

The units also feature advanced Impedance Tolerant EMI/RFI filtering circuitry for additional power conditioning, and COUVS catastrophic over/ under-voltage shutdown circuitry to prevent damage from brownouts and line-fault events.

The SX1120-RT meets the most demanding government purchase specifications for branch circuit surge suppressors. Its A-1-1 rating means dependable protection from destructive spikes, surges and inductive transients.

SurgeX SX1120RT Features:

• Made in U.S.A.
• Magnetic shielding steel enclosure
• 9' grounded 3-wire #12 line cord
• 8 grounded AC outlets on rear panel (6 switched, 2 always on)
• Front panel courtesy outlet
• Advanced Series Mode surge protection
• Advanced Impedance Tolerant EMI/RFI filtering
• SurgeX ICE inrush current elimination technology
• COUVS catastrophic over/under-voltage shutdown
• Remote turn-on
• Thermal circuit breaker overload protection
• Self-test circuit with visual indicator

SurgeX SX1120RT Specifications:

• Load Rating: 20 amps @ 120 volts
• Power Requirement (no load): 15 watts
• Surge Let-Through Voltage (6000-volt surge): 0 volts
• UL 1449 Adjunct Classification Test Results: 1000surges, 6000 volts, 3000 amps, B3 pulse. Measured suppressed voltage: 170 volts, no failures
• Federal Guidelines: Grade A, Class 1, Mode 1 (CIDA-A-55818)
• EMI/RFI Filter, Normal Mode (50-ohm load): 40 dB @100 kHz; 50 dB @ 300 kHz; 50 dB @ 3 MHz; 50 dB @ 30 MHz
• EMI/RFI Filter, Common Mode (50-ohm load): 18 dB @300 kHz; 30 dB @ 1 MHz; 50 dB @ 5 MHz; 50 dB @ 20 MHz
• Maximum Applied Surge Voltage: 6000 volts
• Maximum Applied Surge Current: Unlimited, due to current limiting
• Maximum Applied Surge Energy: Unlimited, due to current limiting
• Endurance (C62.41-1991 Category B3 pulses): 1kV>500,000; 3 kV>10,000; 6 kV>1000
• Undervoltage Shutdown: 90 volts (resume at 100 v)
• Overvoltage Shutdown: 145 volts (resume at 135 v)
• Maximum Load Inrush Current During Power-up: 1000 Joules
• Remote Turn-on Applied Voltage Range: 5 to 30 voltsDC
• Remote Turn-on Current Draw:
  • * Contact Closure: 3mA
  • * 5 V DC Applied Voltage: 1 mA
  • * 12 V DC Applied Voltage: 2.5 mA
  • * 24 V DC Applied Voltage: 5 mA
• Auxiliary Relay Contact Rating: 30 Volts at 1 Amp
• LED Output: 12 volts DC, maximum 20 mA (resistor required)
• Temperature Range: 5º to 35º C
• Humidity Range: 5% to 95% r.h., non-condensing
• Agency Listings: ETL (UL 1449-2)
• Dimensions (H x W x D): 1.75" x 19" x 10.5" (4.5 x 48.3 x 26.7 cm)
• Weight: 11 lbs. (5 kg)