Henry Engineering StereoMixer Eight-Input Stereo Mixer

StereoMixer is an 8-input, 2-output stereo mixer for line level sources. It is an ideal utility mixer that can be used to combine 4 stereo or 8 monaural sources.

StereoMixer can produce either a stereo or mono output, selected by the Output Mode switch. In Stereo mode, 4 stereo sources are combined to a stereo output. In Mono mode, all 8 inputs are combined to a mono output. Each input will accept either a balanced or unbalanced source.

A level control for each input provides adjustment from OFF to +10 dB of gain. All circuitry is direct-coupled and transformerless for absolute sonic integrity. Audio inputs and outputs are via plug-in euroblock connectors.

StereoMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall-mounted with optional wall/cabinet mounting brackets. StereoMixer is powered by an internal AC power supply.

Henry Engineering StereoMixerSpecifications:

• Input Level: -10 to +8 dBm
• Input Impedance: 20K ohms bal, 10K ohms unbalanced
• Output Level: +4 dBm nominal, +26 dBm max
• Output Load: 600 ohms or higher per output, balanced
• Controls: Input gain, 8x
• Gain: OFF to +10 dB
• Frequency Response: DC to 20kHz, ±0.25 dB
• Distortion: < .01% IM/THD
• Noise: >80 dB below nominal output, typ
• Power Requirements: 115/230VAC, 50/60Hz, 3 W
• Construction: Steel enclosure
• Mounting: Table top, optional rack shelf, optional wall/cabinet mounting brackets
• Approval: City of Los Angeles Elect. Test Lab
• Dimensions (W x H x D): 5.7" x 1.7" x 6.0"
• Weight: 3.0 lbs.